SAP STRIP

Code: 4915

A biodegradable, non toxic timber cleaner for removing tannins and extractives.

Features:

Remove tannins and extractives
Remove mill glaze to allow penetration of the coating
Do not have to wait for to timber to weather before applying coatings

Coverage : 300g conatiner will clean approximately 25-30m² of decking and 50m² of vertical surfaces.

Clean Up : Water

Packaging : 300g or 900g

To View Tech Data Sheet and Safety Data Sheet: Register To View

SAP STRIP is essential for use on all timbers under 12 months old where full weathering hasn't occurred.

Note - Mill glaze is a term used when the planers or blades in the dressing process close the top cells of the timber, this gives the timber a polished look.

Application :

Dissolve 300g in 5 litres of hot water (for vertical surfaces dissolve 300g in 10 litres of hot water).

Apply with a brush or garden spray.

Agitate with a stiff broom or brush to bring tannins and extractives to the surface. Leave for 15-30 minutes.

Wash off with a strong jet of water (preferably a power wash) to rid the surface of any residual cleaner and tannins brought to the surface.

All timber under 12 months where full weathering hasn't yet occured.