• Easy to use to achieve an excellent finish with minimal effort or expertise
• Excellent build reduces the number of topcoats required
• Single pack, no pot life issues to manage
• Formaldehyde free, safer for the applicator, zero formaldehyde emissions in rooms in which articles are  installed
• Phthalate free, ideal for children’s toys and furniture

Specifications:

Colour : White, matched to colour on request
Finish : Matt (10%), Satin (30%), Semi Gloss (60%) & Full Gloss
Build : Good
Sandability : Good
Vertical Hold Up : Good
Solvent Resistance : Good
Water Resistance : Good
Levelling & Flow : Very Good
Sink Back : Minimal
Coverage : 8m2 per litre at 125 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated
Dry Time : Refer to Technical Data Sheet
Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner

To View Tech Data Sheet and Safety Data Sheet: Register To View

Thinning : Thin 10-20% with MIROSOL 1222 or 1220 (Fast), 1294 (Medium), 1242 (Slow).
Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi).
Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max.
Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi).
Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi).

Where To Use: Interior use only. Ideal for domestic furniture, internal doors, children’s toys and furniture and built in wardrobes.