Our Products

MIROTEC WB 8126 Water Based Undercoat

MIROTEC WB 8126 Water Based Undercoat main image
MIROTEC WB 8126 Water Based Undercoat-image

Code: 8126

A pigmented, single pack, water based undercoat that may be applied by spray, it is especially suited for application on automatic lines.
Features:
  • Single pack, no pot life issues to manage and less waste of product.
  • Excellent sanding, powders easily.
  • Low VOC (solvent content), non-flammable, low odour safer for workers and the environment.
  • Complies with the Green Bui;ding Council Australia: Green Star - Office Design v3 & Office As Built, Table IEQ-13.1 Maximum TVOC Content Limits for Paints, Varnishes and Protective Coatings.
  • Mould resistant, contains fungal biocides for in-can stability and protection against discolouration from fungal / mould stains once applied.

Specifications:

Build: Good

Sandability: Excellent

Vertical Hold-Up: Very Good

Solvent Reistance: Good

Water Resistance: Excellent

Levelling & Flow: Excellent

Sink Back: Minimal Colour: White

Coverage: 10m2 per litre at 100 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated.

Dry Time: Dust Free: 8-12 minutes  Touch Dry: 10-15 minutes  Sanding: 30-40 minutes   Block Stacking: 24 hours

To View Tech Data Sheet and Safety Data Sheet: Register To View

>