Our Products

MIROCAT PC 3241 Clear Sealer

MIROCAT PC 3241 Clear Sealer main image
MIROCAT PC 3241 Clear Sealer-image

Code: 3241

An economical, fast drying, easy to sand clear sealer. Can be applied over dark timbers or stains enhancing the natural colours without clouding the finished appearance.
Features:
  • High build provides improved hold up and reduces the number of coats required
  • Easy to use, achieve an excellent finish with minimal effort
  • Fast drying allows early sanding which minimises production time

Specifications:

Colour : Turbid in can, dries clear
Build : High
Sandability : Excellent
Vertical Hold Up : Very Good
Solvent Resistance : Good
Water Resistance : Good
Levelling & Flow : Excellent
Sink Back : Minimal
Coverage : 6m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated
Dry Time : Refer to Technical Data sheet
Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner

To View Tech Data Sheet and Safety Data Sheet: Register To View

Thinning : Thin up to 10% with MIROSOL 1222 or 1220 (Fast), 1294 (Medium), 1242 (Slow).

Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi).
Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max.
Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi).
Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi).

Where To Use: Interior use only. Ideal for domestic furniture, children’s toys and furniture, picture frames, musical instruments, joinery and antique restoration.

>