MIROLAC NC Nitrocellulose & MIROCAT PC Pre-Catalysed Lacquers

Mirotone’s produces a high quality range of easy to use lacquers. Ideal for use on domestic furniture, internal doors and children’s toys and furniture. Easy to use and available in a range of gloss levels, Mirotone has the right system to meet your requirements.

 

MIROLAC NC 3130 White Undercoat

MIROLAC NC 3130 White Undercoat main image
MIROLAC NC 3130 White Undercoat-image

Code: 3130

A user friendly, single pack, pigmented undercoat for internal wood and medium density fireboard (MDF). It is fast drying with excellent sanding properties.
Features:
  • Easy to sand, powders easily reducing sanding time
  • Fast drying enables increased production throughput
  • Minimises the risk of wax extraction when applied over MDF and HDF
  • Single pack, no pot life issues to manage
  • Formaldehyde free. safer for the applicator, zero formaldehyde emissions in rooms in which articles are installed
  • Use up left over MIROLAC NC 3150 topcoat by adding MIROLAC NC 3130 to create your own tinted undercoats

Specifications:

Colour : White
Build : Good
Sandability : Good
Vertical Hold Up : Good
Solvent Resistance : Good
Water Resistance : Good
Levelling & Flow : Very Good
Sink Back : Minimal
Coverage : 6m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated
Dry Time : Refer to Technical Data Sheet
Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner

To View Tech Data Sheet and Safety Data Sheet: Register To View

Application:

Thinning: Thin 25-40% with MIROSOL 1222 or 1220 (Fast), 1294 (Medium), 1242 (Slow).

Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi).
Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max.
Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi).
Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi).

Where To Use: Interior use only. Ideal for domestic furniture, internal doors, children’s toys and furniture and built in wardrobes.

 

>