Specialty Coatings

MIROLOK 3512 Clear Plastic Primer

MIROLOK 3512 Clear Plastic Primer main image
MIROLOK 3512 Clear Plastic Primer-image

Code: 3512

Very fast drying, clear primer that provides excellent adhesion to plastic, acrylic, vinyl and LPM.
Features:
  • Easy to use, no mixing or pot life issues
  • Fast drying
  • Excellent adhesion
  • No sanding required

To View Tech Data Sheet and Safety Data Sheet: Register To View

Application: All substrates must be free from dust, grease, dirt and all other contaminants before proceeding. Contaminants may be removed by washing the substrate with MIROSOL 1231 Wax & Grease Remover. Apply a light even coat of MIROLOK 3512 per the Application Methods section.

Where To Use:

Low pressure melamine (LPM), plastic substrates such as polypropylene, polyethylene and vinyl, acrylic substrates including PMMA and Perspex and DAP board.

Note: there are a wide range of plastic and acrylic substrates with different chemical compositions available in the market place, it is therefore essential that the user tests the adhesion of MIROLOK 3512 as part of the full coating system on a test sample before commencing commercial production.

>