Timber Coatings

 

MIROSTAIN 2101 Dye Stain - Fast Drying (Water Based)

MIROSTAIN 2101 Dye Stain - Fast Drying (Water Based) main image
MIROSTAIN 2101 Dye Stain - Fast Drying (Water Based)-image

Code: 2101

Low grain raising, water based stain designed to provide uniform colour with excellent clarity without masking the wood grain.
Features:
  • Low odour, low VOC, non flammable, no class 3 flammable goods storage required
  • Universal application, can be applied by spraying, wiping, brushing or dipping
  • Medium-slow dry speed, easy to apply resulting in a uniform applications
  • Excellent light stability for dye stain thereby proving more consistent and fade resistant colours

Specifications:

Colour (Tint Strength) : TV - Ultra String Tint TX - Strong Tint TY - Medium Tint TZ - Light Tint
Primary Colours : #5000 yellow #5067 Orange #7000 Red #7270 Crimson #8000 Blue #9999 Black
Coverage : The coverage is determined by the application method and the strength of colour required
Dry Time : Refer to Technical Data Sheet
Clean Up : Clean all equipment using water

To View Tech Data Sheet: Register To View
Application:

Thinning : MIROSTAIN 2101 is supplied ready for use (RFU). However to achieve lighter tones reduce with MIROSTAIN 2101 CTB.

Pad or Rag - Use a clean lint free cloth, apply in even strokes.
Suction Gun - Use 1.5mm (59 thou) orifice with 280kpa (35 psi). It is important not to apply MIROSTAIN above this pressure to avoid dark or blotchy discolouration.
Pressure Pot - Use 1mm orifice with pressure pot air-cap. Gun pressure 280kpa (35 psi) and a pot pressure of 16kpa (2 psi) max.
Airless Spray - Contact Mirotone’s Technical department.
Air Mix Guns - Contact Mirotone’s Technical department.

Where To Use:

Interior use only. Pine furniture, architraves and skirting boards, internal doors, built-in wardrobes and joinery and fixtures.

Stain Colour Charts

When choosing a colour for your project it is important to consider the type of timber finish you require for your chosen project. The choice of timber stain is crucial as the surface will need to withstand general wear and tear and environmental factors. It is also important to consider the type of timber used for the project. Final colour appearance may vary with different timber species, texture, size and shape of the area. Stain colours available in 4L, 20L and 205L.

Need more information about our colour range? Contact Mirotone

>