MIROTEC WB Water Based Coatings

Mirotone’s range of water based coatings are easy to use and low VOC making them ideal for use on domestic furniture, children’s toys and furniture, picture frames, musical instruments and antique restoration. MIROTEC WB 8052 is also ideal for use on bar and table tops, bathroom vanities and commercial work. Easy to use and available in a range of gloss levels, Mirotone has the right system to meet your requirements.

 

MIROTEC WB 8126 Water Based Undercoat

MIROTEC WB 8126 Water Based Undercoat main image
MIROTEC WB 8126 Water Based Undercoat-image

Code: 8126

A pigmented, single pack, water based undercoat that may be applied by spray, it is especially suited for application on automatic lines.
Features:
  • Single pack, no pot life issues to manage and less waste of product.
  • Excellent sanding, powders easily.
  • Low VOC (solvent content), non-flammable, low odour safer for workers and the environment.
  • Complies with the Green Bui;ding Council Australia: Green Star - Office Design v3 & Office As Built, Table IEQ-13.1 Maximum TVOC Content Limits for Paints, Varnishes and Protective Coatings.
  • Mould resistant, contains fungal biocides for in-can stability and protection against discolouration from fungal / mould stains once applied.

Specifications:

Build: Good

Sandability: Excellent

Vertical Hold-Up: Very Good

Solvent Reistance: Good

Water Resistance: Excellent

Levelling & Flow: Excellent

Sink Back: Minimal Colour: White

Coverage: 10m2 per litre at 100 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated.

Dry Time: Dust Free: 8-12 minutes  Touch Dry: 10-15 minutes  Sanding: 30-40 minutes   Block Stacking: 24 hours

To View Tech Data Sheet and Safety Data Sheet: Register To View

>