AFTERCARE & Ancillaries
Mirotone produces a range of aftercare and ancillary products for wood repair and furniture restoration. This range of effective yet easy-to-use products complement Mirotone’s range of interior wood coatings.
Code: 1012-6615-2158
Grey etch primer.
To View Tech Data Sheet and Safety Data Sheet: Register To View
Type:
Gloss Level:
Colour Type:
Code: 1019
General purpose paint stripper suitable for stripping most types of paint from timber and metal surfaces.
Features:
- Ready for use
- Apply by brush
Type:
Other
Gloss Level:
Colour Type:
Code: 1702
Easy to use, single-pack wood filler used to produce a closed-pore finish.
To View Tech Data Sheet and Safety Data Sheet: Register To View
Type:
Other
Gloss Level:
Colour Type:
Code: 1012-002
Environmentally friendly, wax polish made from a blend of beeswax and tree oils, designed to clean, seal and protect while providing a protective, heat and alcohol resistant coating. This natural wax finish is designed to produce a low gloss lustre or where the appearance of natural timbers is to be enhanced.
Ready For Use: Apply straight from the can with a soft rag as a furniture polish or reviver.
Specifications:
Colour : Natural
Finish : Mineral Turps
To View Tech Data Sheet: Register To View
Application:
Wipe - Soak steelwool (00 or 000 grade) with MIROWAX 738 mixed with 1:1 mineral turps. Rub in the direction of the grain to a smooth finish. Remove excess with a clean soft lint free cloth.
Spray - Lightly denib the surface with 400 grit sandpaper. Dilute MIROWAX 738 1 part to 2-3 parts mineral turps. Spray a light coat over the surface. Remove excess with a soft lint free cloth.
Where To Use: Children's toys, furniture, trophey bases & carved ornaments and articles.
Type:
Gloss Level:
Colour Type:
Natural
Code: 1012004
Lightly perfumed, silicone-free furniture polish which has been specifically formulated to clean and protect both lacquered and unlacquered wooden articles.
Features:
- Spray Glow is suitable for cleaning and protecting any low gloss surface, including laminated bench tops and cupboards.
Type:
Other
Gloss Level:
Low Gloss
Colour Type:
Clear
Code: 3520
Temporary coating designed to provide a removable protective film to the inside of galvanised steel spray booths. This film can be easily removed to reduce unwanted overspray build up reducing the risk of dust contamination and the risk of fire.
Features:
- Fast drying
- White in colour, provides good light reflection when applied to internal spray booths
- Dries to a strippable film when applied at the correct wet film thickness
- Dries to a white flexible film
Type:
Other
Gloss Level:
Colour Type:
Code: 1012-6980-0001
High gloss white enamel.
To View Tech Data Sheet and Safety Data Sheet: Register To View
Type:
Gloss Level:
Colour Type:
Code: 1012-6640-9999
Black etch primer.
To View Tech Data Sheet and Safety Data Sheet: Register To View
Type:
Gloss Level:
Colour Type:
Code: 1012-3125-0001
White nitrocellulose undercoat.
Features:
Our range of MIROMET Aerosols have all the protection and performance you have come to expect with Mirotone Coatings. Our MIROMET Aerosol range includes:
- MIROKEY VY 6615 Grey Etch Primer
- MIROKEY VY 6640 Black Etch Primer
- MIROLON AK 6980 White High Gloss Topcoat
- MIROLAC NC 3125 Universal White Undercoat
Type:
Gloss Level:
Colour Type:
Code: 1012-6615-2158
Grey etch primer.
To View Tech Data Sheet and Safety Data Sheet: Register To View
Read More
Code: 1019
General purpose paint stripper suitable for stripping most types of paint from timber and metal surfaces.
Features:
Ready for use
Apply by brush
Specifications:
Clean Up : Clean all equipment using MIROSOL 1228 or 1231. Metal surfaces may be hosed down with a high pressure water jet wash.
Application:
Apply a thick film by brush. Allow to stand for 3 to 5 minutes (most paints will bubbles and wrinkle). Remove with a wide metal scraper.
MIROSTRIP may be left longer (10-30 minutes) for more difficult to remove paints. Sanding the surface prior to application of MIROSTRIP 1019 with 180 grit sandpaper can help the stripper to penetrate the coating.
Ensure that all MIROSTRIP 1019 is thoroughly removed before coatings (sand with 180-240 grit sandpaper to remove residue).
Where To Use:
Removes most type of paint; nitrocellulose, precatalysed lacquers, alkyd paints, acid catalysed and polyurethane coatings.
To View Tech Data Sheet and Safety Data Sheet: Register To View
Read More
Code: 1702
Easy to use, single-pack wood filler used to produce a closed-pore finish.
To View Tech Data Sheet and Safety Data Sheet: Register To View
Read More
Code: 1012-002
Environmentally friendly, wax polish made from a blend of beeswax and tree oils, designed to clean, seal and protect while providing a protective, heat and alcohol resistant coating. This natural wax finish is designed to produce a low gloss lustre or where the appearance of natural timbers is to be enhanced.
Ready For Use: Apply straight from the can with a soft rag as a furniture polish or reviver.
Specifications:
Colour : NaturalFinish : Mineral Turps
To View Tech Data Sheet: Register To View
Application:
Wipe - Soak steelwool (00 or 000 grade) with MIROWAX 738 mixed with 1:1 mineral turps. Rub in the direction of the grain to a smooth finish. Remove excess with a clean soft lint free cloth.
Spray - Lightly denib the surface with 400 grit sandpaper. Dilute MIROWAX 738 1 part to 2-3 parts mineral turps. Spray a light coat over the surface. Remove excess with a soft lint free cloth.
Where To Use: Children's toys, furniture, trophey bases & carved ornaments and articles.
Read More
Code: 1012004
Lightly perfumed, silicone-free furniture polish which has been specifically formulated to clean and protect both lacquered and unlacquered wooden articles.
Features:
Spray Glow is suitable for cleaning and protecting any low gloss surface, including laminated bench tops and cupboards.
Colour : Clear
Finish : Low Gloss
Application: Apply a light even coat, hold can approximately 30cm from the article being coated. Wipe with a soft cloth.
Where To Use: Furniture polish. low gloss kitchen cupboards, laminex benchtops (low gloss)
To View Tech Data Sheet: Register To View
Read More
Code: 3520
Temporary coating designed to provide a removable protective film to the inside of galvanised steel spray booths. This film can be easily removed to reduce unwanted overspray build up reducing the risk of dust contamination and the risk of fire.
Features:
Fast drying
White in colour, provides good light reflection when applied to internal spray booths
Dries to a strippable film when applied at the correct wet film thickness
Dries to a white flexible film
To View Tech Data Sheet: Register To View
Where To Use: Galvanised steel spray booths only
Read More
Code: 1012-6980-0001
High gloss white enamel.
To View Tech Data Sheet and Safety Data Sheet: Register To View
Read More
Code: 1012-6640-9999
Black etch primer.
To View Tech Data Sheet and Safety Data Sheet: Register To View
Read More
Code: 1012-3125-0001
White nitrocellulose undercoat.
Features:
Our range of MIROMET Aerosols have all the protection and performance you have come to expect with Mirotone Coatings. Our MIROMET Aerosol range includes:
MIROKEY VY 6615 Grey Etch Primer
MIROKEY VY 6640 Black Etch Primer
MIROLON AK 6980 White High Gloss Topcoat
MIROLAC NC 3125 Universal White Undercoat
Specifications:
Colour: White
Finish: Grey & Black
Coverage: Primer, Undercoat & Topcoat, Approximately 2 square metres per can depending on the colour
Packaging: 300 gram aerosol can
To View Tech Data Sheet and Safety Data Sheet: Register To View
Application:
The nozzle produces a fan shaped spray similar to a professional spray gun. Spray with smooth, even horizontal strokes about 10-15cm from the job. Apply until coverage is obtained. In cold weather warm can to room temperature for optimum spraying performance. Touch dry in 20-30 minutes but allow overnight drying before handling. If second coat is required, recoat within 10-15 minutes or after 24 hours. If in doubt, test in a non-critical area.
Where To Use:
Touch ups
Read More