Code: 3512

Very fast drying, clear primer that provides excellent adhesion to plastic, acrylic, vinyl and LPM.

Features:

Easy to use, no mixing or pot life issues
Fast drying
Excellent adhesion
No sanding required

To View Tech Data Sheet and Safety Data Sheet: Register To View

Application: All substrates must be free from dust, grease, dirt and all other contaminants before proceeding. Contaminants may be removed by washing the substrate with MIROSOL 1231 Wax & Grease Remover. Apply a light even coat of MIROLOK 3512 per the Application Methods section. Where To Use: Low pressure melamine (LPM), plastic substrates such as polypropylene, polyethylene and vinyl, acrylic substrates including PMMA and Perspex and DAP board. Note: there are a wide range of plastic and acrylic substrates with different chemical compositions available in the market place, it is therefore essential that the user tests the adhesion of MIROLOK 3512 as part of the full coating system on a test sample before commencing commercial production.

Type:

Gloss Level:

Colour Type:

MIROLON 6980 AEROSOL

Code: 1012-6980-0001

High gloss white enamel.

To View Tech Data Sheet and Safety Data Sheet: Register To View

Type:

Gloss Level:

Colour Type:

MIROKEY VY 6640 AEROSOL

Code: 1012-6640-9999

Black etch primer.

To View Tech Data Sheet and Safety Data Sheet: Register To View

Type:

Gloss Level:

Colour Type:

MIROLAC NC 3125 AEROSOL

Code: 1012-3125-0001

White nitrocellulose undercoat.

Features:

Our range of MIROMET Aerosols have all the protection and performance you have come to expect with Mirotone Coatings. Our MIROMET Aerosol range includes:

Specifications: Colour: White Finish: Grey & Black Coverage: Primer, Undercoat & Topcoat, Approximately 2 square metres per can depending on the colour Packaging: 300 gram aerosol can To View Tech Data Sheet and Safety Data Sheet: Register To View Application: The nozzle produces a fan shaped spray similar to a professional spray gun. Spray with smooth, even horizontal strokes about 10-15cm from the job. Apply until coverage is obtained. In cold weather warm can to room temperature for optimum spraying performance. Touch dry in 20-30 minutes but allow overnight drying before handling. If second coat is required, recoat within 10-15 minutes or after 24 hours. If in doubt, test in a non-critical area. Where To Use: Touch ups

Type:

Gloss Level:

Colour Type:

MIROKEY VY 6615 AEROSOL

Code: 1012-6615-2158

Grey etch primer.

To View Tech Data Sheet and Safety Data Sheet: Register To View

Type:

Gloss Level:

Colour Type:

MIROKEY VY 6615 Etch Primer

Code: 6615

High performance, zinc phosphate etch primer specifically designed for direct application over mild steel, zinc-anneal, chrome, brass, lead and lead alloys, stainless steel, aluminium and galvanised iron.

Features:

Excellent adhesion to a variety of cleaned metal surfaces
Single pack, easy to use
Contains zinc phosphate, proven corrosion resistance
Fast drying

Specifications: Colour : White or Grey Build : Good Vertical Hold Up : Excellent Solvent Resistance : Dependent on topcoat Water Resistance : Very Good Levelling & Flow : Very Good Sink Back : Minimal Coverage : 7-10m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1234 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Thinning : Thin 5 to 15% with MIROSOL 1234 or 1286 Fast or 1294 Medium Thinner. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Metal fabrication, box trailers, caravans, safes, plant & machinery, farming equipment, earth moving equipment, skip bins and automotive.

Type:

Gloss Level:

Colour Type: White, Grey

MIROTHANE PU 5629 Undercoat

Code: 5629

A premium grade, high solids , low viscosity polyurethane primer for metal.

Features:

Easy to sand, poweders easily making it ideal for hand sanding
High solids, low viscosity provides superior build with minimal thinning
Superior chemical and moisture resistance
Fast drying properties ensure early recoat and faster shipping & handling times

Specifications: Colour : White, black tinted Finish : N/A Build : Very High Sandability : Excellent Vertical Hold Up : Excellent Solvent Resistance : Excellent Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6 -7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 Thinner Packaging : 4 -16L To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : 3 parts 5629 Part A + 1 part 5747 Part B (3A:1B) Pot Life : 2 hours at 25°C (refer to datasheet) Thinning : Thin up to 20% with MIROSOL 1217 (Fast), 1265 (Medium), 1266 (Slow), 1218 (Ultra Slow) Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior & exterior applications suitable for some automotive plastic & plastic parts, metal structural frames, machinery, caravans & earthmoving equipment.

Type:

Gloss Level:

Colour Type: White, Black Tinted

MIROTEC WB 8126 Water Based Undercoat

Code: 8126

A pigmented, single pack, water based undercoat that may be applied by spray, it is especially suited for application on automatic lines.

Features:

Single pack, no pot life issues to manage and less waste of product.
Excellent sanding, powders easily.
Low VOC (solvent content), non-flammable, low odour safer for workers and the environment.
Complies with the Green Bui;ding Council Australia: Green Star - Office Design v3 & Office As Built, Table IEQ-13.1 Maximum TVOC Content Limits for Paints, Varnishes and Protective Coatings.
Mould resistant, contains fungal biocides for in-can stability and protection against discolouration from fungal / mould stains once applied.

Specifications: Build: Good Sandability: Excellent Vertical Hold-Up: Very Good Solvent Reistance: Good Water Resistance: Excellent Levelling & Flow: Excellent Sink Back: Minimal Colour: White Coverage: 10m2 per litre at 100 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated. Dry Time: Dust Free: 8-12 minutes Touch Dry: 10-15 minutes Sanding: 30-40 minutes Block Stacking: 24 hours To View Tech Data Sheet and Safety Data Sheet: Register To View

Type: Undercoat

Gloss Level:

Colour Type:

MIROPOL PE 5007 High Gloss Clear Topcoat

Code: 5007

A high build, isocyanate free, two pack polyester, clear coating. MIROPOL 5007 Clear has a very hard, high gloss clear topcoat finish to provide a “glass like” appearance.

Features:

High Build
Very High Gloss
MIROPOL 5007 Clear can be applied to both natural timber substrates or foil covered MDF board. For interior use only.

Specifications: Colour : Clear Finish : Full Gloss Build : Excellent Sandability : Good Vertical Hold Up : Good Solvent Resistance : Excellent Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 8m2 per litre at 100-150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1215 Thinner Packaging : 20L

To View Tech Data Sheet and Safety Data Sheet: Register To View

Application: Mixing Ratio (by volume) : Mix 1 part by volume MIROPOL 5007 Clear Topcoat to 1 part by volume MIROPOL 5007 "B" Solution and stir thoroughly. Pot Life : 2-3 hours (mix only samll quantities at any one time). Thinning : Not required as MIROPOL 5007 Clear us supplied ready for ysue (RFU). If required use MIROSOL 1234 Ultra Fast Thinner sparingly. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use. Solid and veneer timber fixtures and furniture. Restaurant, bar, and hotel furniture. Piano's. Funeral caskets and shop fittings

Type: Sealer

Gloss Level: full gloss

Colour Type: Clear

MIROSOL 1294 Medium Lacquer Thinner

Code: 1294

To View Tech Data Sheet and Safety Data Sheet: Register To View

Type: Thinners

Gloss Level:

Colour Type:

MIROSOL 1281 Matt Promoter

Code: 1281

To View Tech Data Sheet and Safety Data Sheet: Register To View

Type: Thinners

Gloss Level:

Colour Type:

MIROSOL 1280 Fast Polyurethane Thinner

Code: 1280

Fast polyurethane thinner

To View Tech Data Sheet and Safety Data Sheet: Register To View

Type: Thinners

Gloss Level:

Colour Type:

MIROSOL 1266 Med/Slow Polyurethane Thinner

Code: 1266

To View Tech Data Sheet and Safety Data Sheet: Register To View

Type: Thinners

Gloss Level:

Colour Type:

MIROSOL 1265 Medium Polyurethane Thinner

Code: 1265

To View Tech Data Sheet and Safety Data Sheet: Register To View

Type: Thinners

Gloss Level:

Colour Type:

MIROSOL 1260 Slow Polyurethane Thinner

Code: 1260

To View Tech Data Sheet and Safety Data Sheet: Register To View

Type: Thinners

Gloss Level:

Colour Type:

MIROSOL 1234 Ultra Fast Primer Thinner

Code: 1234

To View Tech Data Sheet and Safety Data Sheet: Register To View

Type: Thinners

Gloss Level:

Colour Type:

MIROSOL 1231 Wax & Grease Remover

Ultra fast thinner

To View Tech Data Sheet and Safety Data Sheet: Register To View

Type: Thinners

Gloss Level:

Colour Type:

MIROSOL 1208 Acetone Ultra Fast Thinner

Code: 1208

To View Tech Data Sheet and Safety Data Sheet: Register To View

Type: Thinners

Gloss Level:

Colour Type:

MIROTEC WB 8060 Clear Topcoat

Code: 8060

Clear, single pack, water based topcoat. It is easy to apply and low yellowing.

Features:

Single pack, no pot life issues to manage and less waste of product
Water white and low yellowing, it is ideal for use over blonde timbers and liming stains
To minimise the risk of sink back and tannin bleed and achieve the best possible water and chemical resistance, apply MIROTHANE PU 5500 Clear Isolator mixed 10A:1B with MIROTHANE PU 5789 Hardener, as a first coat on bare wood
Higher solids content than clear nitrocellulose and precatalysed lacquers with similar chemical resistance to clear precatalysed lacquers.
Low VOC (solvent content), non-flammable, low odour, safer for workers and the environment
Formaldehyde free, zero formaldehyde emissions in rooms in which coated articles are installed or used
Isocyanate free, does not require air assisted face masks or other respiratory personal protective equipment for application
Phthalate free, it is ideal for children’s toys
Complies with the Green Building Council Australia: Green Star – Office Design v3 & Office As Built, Table IEQ-13.1 Maximum TVOC Content Limits for Paints, Varnishes and Protective Coatings

Specifications: Colour : Clear Finish : Matt (10%), Satin (30%) & Semi Gloss (60%) Build : Good Sandability : Excellent Vertical Hold Up : Very Good Solvent Resistance : Good Water Resistance : Good Levelling & Flow : Excellent Sink Back : Minimal Coverage : 7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment with water following use. Refer to Technical Data Sheet for further information To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Thinning : Thin 10-15% with water depending upon application requirements. In cold conditions or when a faster dry time is required, MIROSTAIN 2101 Clear Tint Base (CTB) may be used to thin MIROTEC WB 8060. Note: only thin the volume of MIROTEC WB 8060 required for the job at hand. Once thinned the viscosity will continue to fall during the next 24 hours. If the application viscosity is too low, mix with some unthinned MIROTEC WB 8060 to bring the viscosity back up to the target. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Ideal for domestic and commercial furniture, children’s toys and furniture, picture frames, musical instruments, joinery and antique restoration.

Type: Topcoat

Gloss Level: matt, satin, semi-gloss

Colour Type: Clear

MIROTHANE PU 5650 Pigmented Topcoat

Available in an extensive colour range or tintable to a colour sample
Excellent flow and levelling results in a smooth even finish
With the application of the recommended undercoat or primer may be applied over wood, MDF, melamine, glass, metal and plastic

Specifications: Colour : White & Tinted Colours Finish : Satin (30%), Semi Gloss (60%) & Full Gloss Build : Very Good Sandability : Good Vertical Hold Up : Good Solvent Resistance : Excellent Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 8m2 per litre at 125 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner Packaging : 1-16L To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : Refer to Technical Data Sheet. Pot Life : Satin & Semi Gloss: > 8 hours Full Gloss: 2 – 8 hours Pot life varies significantly with ambient temperature, humidity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning : Satin & Semi Gloss – Thin 40-55% with MIROSOL 1217 (Fast), 1263 (Medium), 1266, 1218 (Slow) when using high solids Part B. When using Ready For Use (RFU) Part B’s thin 30-40%. Full Gloss – thin up to 25% with MIROSOL 1263 (Medium), 1260, 1266, 1218 (Slow) when using high solids Part B. When using RFU Part B’s thin 20-30%. MIROSOL 1281 Matt Promoter may be added to MIROTHANE PU 5650 Satin at an addition rate of 30-40% to achieve an approximate gloss level of 10-15%. In order to maintain consistency of colour and gloss during a job or repeat jobs of the same colour, it is critical to use the same Part B Hardener and thinner throughout. To speed up dry time add up to 3% MIROTHANE PU 5795 Accelerator. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use. Interior doors, kitchen & bathroom cabinets, commercial joinery and wall panelling and domestic furniture. With the appropriate primers may be used to topcoat glass, plastic and metal.

Type: Topcoat

Gloss Level:

Colour Type: White, Tinted

MIROTHANE PU 5608 Pigmented Topcoat

Code: 5608

MIROTHANE PU 5608 is an economical, user friendly, two pack pigmented polyurethane topcoat for quality furniture and fittings.

Features:

Excellent flow, high build and quick drying
Economical, cost effective furniture grade polyurethane

Specifications: Colour : White, full colour range Finish : Matt (10%), Satin (30%) & Semi-Gloss (60%) Build : Very Good Sandability : Very Good Vertical Hold Up : Excellent Solvent Resistance : Very Good Water Resistance : Very Good Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1215 or 1217 Thinner Packaging : 1, 4 & 16L To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : Refer to Technical Data Sheet. Pot Life : 6-8 hours at 25°C (Refer to Technical Datas Sheet). Thinning : Thin 20-40% with MIROSOL 1280 (fast), 1265 (medium), 1266 (Slow) Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Domestic furniture, commercial joinery, kitchen and bathroom cabinetry.

Type: Topcoat

Gloss Level:

Colour Type: White & Colours

MIROTHANE PU 5610 Pigmented Topcoat

Code: 5610

High performance, two pack, acrylic modified polyurethane coating. MIROTHANE PU 5610 has superior adhesion over a wide variety of substrates.

Features:

Outstanding durability, gloss and colour retention
Excellent opacity, achieve a high gloss finish with minimal coats

Specifications: Colour : White and Tinted Colours Finish : Gloss Build : Good Sandability : Good Vertical Hold Up : Good Solvent Resistance : Excellent Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner

To View Tech Data Sheet and Safety Data Sheet: Register To View

Application: Mix Ratio (by volume) : 4 Parts 5610 Part A + 1 Part 5789 Part B (4A: 1B). Pot Life : Up to 10 hours Pot life varies significantly with ambient temperature, humidity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning : 25-40% with MIROSOL 1266 (fast), 1260 (Medium), 1218 (Slow) thinner. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Petrochemical industry, road tankers, tank farms, marine environment, concrete mixing bowls, trailers, horse floats, truck chassis, automotive, CFC toilet partitions.

Type: Topcoat

Gloss Level:

Colour Type: White, Tinted

MIROTHANE PU 5588 Clear Topcoat

Code: 5588

User friendly, easy to apply, clear polyurethane topcoat. Excellent flow and quick drying ensures an excellent finish and increased throughput.

Features:

Can be applied over a range of sealers including MIROCAT PC 3241 and MIROCAT PC 3242 Preact Sealers and MIROTHANE PU 5533 and MIROTHANE PU 5545 Polyurethane
Excellent flow and levelling
Economical – a cost effective furniture grade polyurethane topcoat

Specifications: Colour : Clear Finish : Satin (30%) and Satin (20%) Build : Very Good Sandability : Very Good Vertical Hold Up : Good Solvent Resistance : Very Good Water Resistance : Very Good Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : 4 Parts 5588 Part A + 1 Part 5747 Part B (4A:1B) or 10 Parts 5588 Part A + 1 Part 5715, 5728, 5735 or 5757 (10A:1B) Pot Life : 4-6 hours at 25°C Pot life varies significantly with ambient temperature, humdity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning : Thin 20-40% with MIROSOL 1217 (Fast), 1263 (Medium), 1266 (Slow) Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Domestic furniture, commercial joinery and kitchen cabinets

Type: Topcoat

Gloss Level:

Colour Type: Clear

MIROTHANE PU 5578 Clear Natural Topcoat

Code: 5578

High performance, fast drying, clear, two pack, non-yellowing, acrylic polyurethane for interior wood and wood composites. It has a natural matt finish and has outstanding durability, flexibility and colour stability.

Features:

Contains UV absorbers and light stabilisers that have been proven highly effective in protecting reconstituted, dyed and natural wood veneers from colour change when exposed to ultraviolet (UV) light
Low gloss is resistant to unsightly oily fingerprints. Fingerprints can be easily removed with a clean lint free cloth without leaving residual glossy spots, particularly important when applying a clear matt topcoat over a dark base
Fast drying
Mould resistant – under normal atmospheric conditions. (i.e. article is kept in a properly ventilated room by either open windows or used in a room with air extractor fans)

Specifications: Colour : Clear Finish : 5% and 20% Build : Good Sandability : Good Solvent Resistance : Very Good Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : Matt & Satin: 5 Parts 5578 Part A + 1 Part 5735 Part B (5A:1B), MIROTHANE PU 5747 may also be used in Matt. Pot Life : Up to 24 hours at 25°C Pot life varies significantly with ambient temperature, humidity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning : Thin 30% with MIROSOL 1217 (Fast), 1266 (Slow), 1218 (Ultra Slow) Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior: Reconstituted, dyed and natural wood veneers, joinery, kitchen cupboards, wardrobes, wall panelling, furniture-table topcoat, bench tops, commercial furniture and fit-outs, window furnishings and blinds.

Type: Topcoat

Gloss Level:

Colour Type: Clear

MIROTHANE PU 5577 Sun Shield Clear Topcoat

Code: 5577

High-performance, clear, two-pack, non-yellowing, acrylic polyurethane for interior wood & wood composites. MIROTHANE PU 5577 Sun-Shield contains a sophisticated package of UV absorbers and light stabilisers that have been proven highly effective in protecting reconstituted, dyed and natural wood veneers from colour change when exposed to ultraviolet (UV) light.

Features:

Contains UV absorbers and light stabilisers that have been proven highly effective in protecting reconstituted, dyes and natural wood veneers from colour change when exposed to ultraviolet (UV) light.
High solids means less coats are required to achieve a full finish
Subdued gloss is highly resistant to unsightly oily finger prints. Fingerprints can be easily removed with a clean rag without leaving residual gloss spots, particularly important when applying a clear matt topcoat over a dark base
Available in a full range of gloss levels; matt, satin, semi-gloss and full gloss

Specifications: Colour : Clear Finish : Matt (10%), Satin (30%), Semi Gloss (60%) & Full Gloss Build : Very Good Sandability : Good Vertical Hold Up : Good Solvent Resistance : Very Good Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1208 or 1234 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : Matt & Satin: 4 Parts 5577 Part A + 1 Part 5735 Part B (4A:1B) Full Gloss: 4 Parts 5577 Part A + 1 Part 5757 or 5789 (4A:1B) Pot Life : Up to 8 hours at 25°C Pot life varies significantly with ambient temperature, humidity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning : Matt & Satin: Thin 40-60% with MIROSOL 1217 (Fast), 1263 (Medium), 1266 (Slow), 1218 (Ultra Slow) Full Gloss: Thin up to 15% with MIROSOL 1263 (Medium), 1266 or 1260 (Slow), 1218 (Ultra Slow) Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior: Reconstituted, dyed and natural wood veneers, kitchen cupboards, wall panelling, table topcoat, bench tops, commercial furniture and fit-outs, window furnishings and blinds, children’s toys. Semi Exterior: Covered entry doors and internal faces of opening windows. Exterior: When used as a protective clear topcoat over an exterior grade pigmented basecoat e.g. MIROTHANE PU 5610 polyurethane on metal, plastic or over appropriately primed carbon fibre.

Type: Topcoat

Gloss Level: matt, satin, semi-gloss and full gloss

Colour Type: Clear

MIROTHANE PU 5555 Clear Topcoat

Code: 5555

Premium, two pack, clear polyurethane. High clarity results in striking grain definition and enhances the natural beauty of stained timber.

Features:

Excellent water and chemical resistance makes it ideal for demanding in-service environment such as marine fit-outs, bench tops and bar tops
Very low yellowing, it is suitable for use over light coloured wood and veneers when mixed with a low yellowing MIROTHANE PU Part B Hardener
The full gloss version results in a brilliant high gloss finish with excellent distinction of image (DOI).
Available in satin, semi gloss and full gloss

Specifications: Colour : Clear Finish : Satin (30%), Semi Gloss (60%) & Full Gloss Build : Very Good Sandability : Excellent Vertical Hold Up : Good: Excellent Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner

To View Tech Data Sheet and Safety Data Sheet: Register To View

Application: Mixing Ratio (by volume) : Refer to datasheet for mixing ratios Pot Life : 2-3 hours at 25°C Pot life varies significantly with ambient temperature, humdity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning : Refer to datasheet for thinning Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Ideal for demanding environments such as bar, kitchen bench tops, bathroom vanities, interior marine fit-outs and commercial fit outs.

Type: Topcoat

Gloss Level:

Colour Type: Clear

MIROBILD AC 3750 Pigmented Topcoat

Code: 3750

A high solids, pigmented, acid catalysed topcoat.

Features:

High build, ehances the finished appearance by providing maximum build with the minimum number of coats
Bright white and low yellowing which minimises discolouration of light coloured coatings
Excess MIROBILD AC 3750 topcoat may be added into MIROBILD AC 3720 undercoat. This improves coverage and reduces waste

Specifications: Colour : White & Colours as requested Finish : Satin (30%), Semi Gloss (60%) & Full Gloss Build : Excellent Sandability : Excellent Vertical Hold Up : Excellent Solvent Resistance : Excellent Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1215 Thinner Packaging : 1, 4, 20L

To View Tech Data Sheet and Safety Data Sheet: Register To View

Application: Mixing Ratio (by volume) : Refer to Technical Data Sheet. Pot Life : 1 - 2 days art 25°C (Refer to Technica Datasheet). Thinning : Thin up to 25% with MIROSOL 1294 (Medium Thinner) - (Refer to Technica Datasheet). Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use. Domestic & commercial furniture, wardrobes, kitchen cupboards and doors.

Type: Topcoat

Gloss Level:

Colour Type: White & Colours

MIROBILD AC 3606 Clear Topcoat

Code: 3606

Low odour, low formaldehyde, isocyanate-free, clear acid-catalysed topcoat with a long pot life, suitable for interior wood.

Features:

Fast drying rate and long pot life make it ideal for automatic line operations
Results in a tough resilient film that protects quality furniture and fittings.
High build, provides maximum build with the minimum number of coats applied
Low yellowing, ideally suited for application over blond timbers and liming stains
Low formaldehyde, provides a safer working environment for persons applying the coatings, and compared to conventional acid catalysed coatings, superior in-service air quality around the coated article

Specifications: Colour : Clear Finish : Matt (10%), Satin (30%), Semi Gloss (60%) & Full Gloss Build : Excellent Sandability : Excellent Vertical Hold Up : Excellent Solvent Resistance : Good Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment/gun set up and the article being coated Dry Time : Refer to Technical Datasheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : 10 Parts MIROBILD AC 3606 Part A + 1 Part MIROBILD AC 3800 Universal Catalyst or MIROBILD AC 3810 Quick Dry Catalyst by volume. Mix A & B and then add thinner. Allow mixed product to stand for 15 minutes prior to thinning, this will ensure that maximum film hardness and clarity is obtained. Failure to allow time for reaction to take place may result in a hazy film. Pot Life : 1-2 days at 25°C Pot life varies significantly with ambient temperature, humdity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. Thinning : Thin up to 30% with MIROSOL 1220, 1222 (Fast), 1294 (Medium), 1242 (Slow). In hot or draughty conditions up to 10% MIROSOL 1218 Ultra Slow Thinner may be added. Do not exceed 10% addition as it will retard the drying and could lead to problems with sanding, printing and blocking. Use faster thinners to achieve the required viscosity and then use (only if required) a small amount of MIROSOL 1218 to improve flow and levelling. In damp, cool or high humidity conditions, up to 10% MIROSOL 1297 Retarder may be added to help prevent blushing (a milkiness or haze in the film). Heating the application environment e.g. warming with infra-red lamps and avoid spraying early in the morning and late evening when temperatures are at their coldest, will also help to reduce the risk. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi) Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Curtain Coating - Viscosity 40-50 seconds. Where To Use: Interior use only. Domestic and commercial furniture, wall panelling, joinery and fixtures.

Type: Topcoat

Gloss Level:

Colour Type: Clear

MIROCAT PC 3220 Clear Topcoat

Code: 3220

Premium quality, high build, single pack, pre-catalysed clear lacquer.

Features:

High solids content provides improved hold up for better overall appearance and reduces the number of coats required
Easy to use, achieve an excellent finish with minimal effort
Formulated on a very clear, low yellowing resin and contains UV absorbers to ensure maximum protection of the substrate from UV light
High in can viscosity allows the applicator to adjust the coating viscosity to suit their requirememts
Good clarity, provide good grain definition and depth of colour
Excellent flow and levelling results in a smooth even finish

Specifications: Colour : Clear Finish : Matt (10%), Satin (30%), Semi Gloss (60%) & Full Gloss Build : High Sandability : Excellent Vertical Hold Up : Good Solvent Resistance : Good Water Resistance : Good Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner

To View Tech Data Sheet and Safety Data Sheet: Register To View

Application: Thinning Subdued Gloss : Thin up to 30% with MIROSOL 1222 or 1220 (Fast), 1294 (Medium), 1242 (Slow) Thinning Full Gloss : Thin 20-30% with MIROSOL 1222 or 1220 (Fast), 1294 (Medium), 1242 (Slow) Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Hot Spray - Temperature guide 35-40°C. Where To Use: Interior use only. Ideal for domestic furniture, children's toys and furniture, picture frames, musical instruments, joinery and antique restoration

Type: Topcoat

Gloss Level:

Colour Type: Clear

MIROCAT PC 3210 Clear Topcoat

Code: 3210

User friendly, single pack, pre-catalysed clear lacquer for fixture and furniture finishing.

Features:

Easy to use, achieve an excellent finish with minimal effort
Ready for use (RFU), no thinning required, apply directly from the can
Good clarity, provide good grain definition and depth of colour
Excellent flow and levelling results in a smooth even finish

Specifications: Colour : Clear Finish : Satin (30%) & Semi Gloss (60%) Build : High Sandability : Excellent Vertical Hold Up : Good Solvent Resistance : Good Water Resistance : Good Levelling & Flow : Good Sink Back : Minimal Coverage : 6m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated. Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner

To View Tech Data Sheet and Safety Data Sheet: Register To View

Application: Thinning : Thin up to 10% with MIROSOL 1222 or 1220 (Fast), 1294 (Medium), 1242 (Slow) Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Ideal for domestic furniture, children's toys and furniture, picture frames, musical instruments, joinery and antique restoration

Type: Topcoat

Gloss Level:

Colour Type: Clear

MIROTHANE PU 5545 Clear Sealer

Code: 5545

Premium, two pack, clear, polyurethane sealer that provides an excellent sanding base for clear polyurethane topcoats.

Features:

Good build enhances the final finish by sealing, filling and covering the fibres of the the substrate
Excellent flow and levelling
Easy sanding ensures time to sand and the best possible surface tor topcoating
Low yellowing, suitable over light coloured wood/veneers and liming stains when mixed with one of the low yellowing MIROTHANE Part B Hardeners

Specifications: Colour : Milky in can dries clear Build : Very Good Sandability : Excellent Vertical Hold Up : Good Solvent Resistance : Very Good Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : 2 Parts 5545 Part A + 1 Part 5747 Part B (2A:1B) or 4 Parts 5545 Part A + 1 Part 5715, 5728, 5735 or 5757 (4A:1B) Pot Life : 2-3 hours at 25°C Pot life varies significantly with ambient temperature, humdity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning : Thin 10-20% with MIROSOL 1217 (Fast), 1263 (Medium), 1266 or 1218 (Slow). Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Commercial joinery, wall panelling, domestic furniture, high rise office and hotel fit outs and interior marine fit-outs.

Type: Sealer

Gloss Level:

Colour Type:

MIROLAC NC 3150 Pigmented Topcoat

Code: 3150

User friendly, single pack, pigmented topcoat ideal for furniture and fixtures. It´s easy to apply, fast drying and results in a velvet smooth high build finish

Features:

Easy to use to achieve an excellent finish with minimal effort or expertise
Excellent build reduces the number of topcoats required
Single pack, no pot life issues to manage
Formaldehyde free, safer for the applicator, zero formaldehyde emissions in rooms in which articles are installed
Phthalate free, ideal for children’s toys and furniture

Specifications: Colour : White, matched to colour on request Finish : Matt (10%), Satin (30%), Semi Gloss (60%) & Full Gloss Build : Good Sandability : Good Vertical Hold Up : Good Solvent Resistance : Good Water Resistance : Good Levelling & Flow : Very Good Sink Back : Minimal Coverage : 8m2 per litre at 125 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner

To View Tech Data Sheet and Safety Data Sheet: Register To View

To View Tech Data Sheet and Safety Data Sheet: Register To View

Type: Catalysts & PU Hardeners

Gloss Level:

Colour Type:

Clear, single pack, water based sealer that is easy to apply, low yellowing and easy to sand.

Features:

Single pack, no pot life issues to manage and less waste of product
Easy to sand, powders easily ensuring the quickest time to sand
Water white and low yellowing, it is ideal for use over blonde timbers and liming stain
Good build, to further minimise the risk of sink back and tannin bleed, apply MIROTHANE PU 5500 Clear Isolator as a first coat on bare wood
Low VOC (solvent content), non flammable, low odour, safer for workers and the environment
Formaldehyde free, zero formaldehyde emissions in rooms in which coated articles are installed or used
Isocyanate free, does not require air assisted face masks or other respiratory personal protective equipment for application
Pthalate free, it is ideal for children’s toys
Complies with Green Building Council Australia: Green Star – Office Design v3 & Office As Built, Table IEQ-13.1 Maximum TVOC Content Limits for Paints, Varnishes and Protective Coatings

Specifications: Colour : Clear Build : Good Sandability : Excellent: Vertical Hold Up : Very Good Solvent Resistance : Good Water Resistance : Good Levelling & Flow : Excellent Sink Back : Minimal Coverage : 7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment with water following use

To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Thinning : Supplied ready for use (RFU). However if required, it may be thinned with up to 5% water depending upon application requirements. Note: only thin the volume of MIROTEC WB 8022 required for the job at hand. Once thinned the viscosity will continue to fall during the next 24 hours. If the application viscosity is too low, mix with some unthinned MIROTEC WB 8022 to bring the viscosity back up to the target. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Ideal for domestic and commercial furniture, children’s toys and furniture, picture frames, musical instruments, joinery and antique restoration.

Type: Sealer

Gloss Level:

Colour Type:

MIROTHANE PU 5535 Clear Sealer

Code: 5535

A two pack, clear, polyurethane sanding sealer typically used under MIROPOL PE 5007 High Gloss Clear Top Coat on timber, veneer or foil covered MDF board to provide a high-gloss, wet look finish.

Features:

Fast drying and easy sanding
Excellent flow & levelling
Highlights the grain and colour of Rimu
Can be used under any Mirotone clear topcoat

Specifications: Build: Very Good Sandability: Very Good Vertical Hold Up: Excellent Solvent Resistance: Very Good Water Resistance: Excellent Levelling & Flow: Excellent Sink Back: Minimal Colour: Milky in-can dries clear To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio: 2 Parts 5535 Part A + 1 Part 5730 Part B Pot Life: 3-4 hours at 25ºC (Pot life varies significantly with ambient temperature, humidity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning: Not normally required but can be thinned up to 5% with MIROSOL 1217 Fast Thinner if required. Suction Gun: Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot: Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400 kpa (50-55 psi) and a pot pressure of 45 kpa (6psi) max. Airless Spray - Use 0.23 to 0.33 (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400 kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90 kpa (10-15psi). Where To Use: Interior use only for example solid and veneer timber fixtures and furniture including restaurant, bar and hotel furniture, pianos and caskets.

Type: Sealer

Gloss Level:

Colour Type: Clear

MIROTHANE PU 5500 Isolator

Code: 5500

Versatile clear isolator that minimises the risk of resin exudation and tannin bleed on timber and minimises the risk of edge cracking on MDF.

Features:

Fast drying
No sanding required
Water white, excellent clarity
Excellent adhesion to wood, MDF & LPM

Specifications: Colour : Clear Build : Low Vertical Hold Up : Good Solvent Resistance : Good Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 10m2 per litre at 100 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : When used as a two pack mix 10 Parts 5500 Part A + 1 Part 5789 (10A:1B). Pot Life : 4 hours at 25°C Pot life varies significantly with ambient temperature, humidity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning : Thin single pack 20-30% and two pack 12-25% with MIROSOL 1217 (Fast), 1263 (Medium), 1266 (Slow). Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Tannin blocking primer under MIROTEC WB water based coatings, mouldings, picture frames, MDF furniture and fixtures, MDF routed grooves and solid Jarrah furniture and articles.

Type: Sealer

Gloss Level:

Colour Type: Clear

MIROBILD AC 3622 Clear Sealer

Code: 3622

High build, fast drying, easy sanding, clear acid catalysed sealer. Specifically formulated to provide sound adhesion to DAP and vinyl coated board (commonly used in the casket industry).

Features:

Fast drying rate and long pot life make it ideal for automatic line operations
High build, ensures a full finish when topcoated
Excellent sanding reducing sanding time

Specifications: Colour : Milky in can, dries clear Build : Excellent Sandability :Excellent Vertical Hold Up : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Datasheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner

To View Tech Data Sheet and Safety Data Sheet: Register To View

Application: Mixing Ratio (by volume) : Best adhesion, best gloss hold up and faster cure at low temperatures e.g. below 20°C: 10 Parts MIROBILD AC 3622 Part A + 1 Part MIROBILD AC 3800 Universal Catalyst or MIROBILD AC 3810 Quick Dry Catalyst by volume. For extended pot life, especially at high temperatures e.g. above 30°C 20 Parts MIROBILD AC 3622 Part A + 1 Part MIROBILD AC 3800 Universal Catalyst or MIROBILD AC 3810 Quick Dry Catalyst by volume. Mix A & B and then add thinner. Allow mixed product to stand for 15 minutes prior to thinning, this will ensure that maximum film hardness and clarity is obtained. Failure to allow time for reaction to take place may result in a hazy film. Pot Life : 1-2 days at 25°C Pot life varies significantly with ambient temperature, humdity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. Thinning : Thin 10-15% with MIROSOL 1220 (Fast), 1294 (Medium), 1242 (Slow) In hot or draughty conditions up to 10% MIROSOL 1218 Ultra Slow Thinner may be added. Do not exceed 10% addition as it will retard the drying and could lead to problems with sanding, printing and blocking. Use faster thinners to achieve the required viscosity and then use (only if required) a small amount of MIROSOL 1218 to improve flow and levelling. In damp, cool or high humidity conditions, up to 10% MIROSOL 1297 Retarder may be added to help prevent blushing (a milkiness or haze in the film). Heating the application environment e.g. warming with infra-red lamps and avoid spraying early in the morning and late evening when temperatures are at their coldest, will also help to reduce the risk. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Curtain Coating - Viscosity 40-50 seconds. Where To Use: Interior use only. Domestic and commercial furniture, caskets.

Type: Sealer

Gloss Level:

Colour Type:

MIROCAT PC 3241 Clear Sealer

Code: 3241

An economical, fast drying, easy to sand clear sealer. Can be applied over dark timbers or stains enhancing the natural colours without clouding the finished appearance.

Features:

High build provides improved hold up and reduces the number of coats required
Easy to use, achieve an excellent finish with minimal effort
Fast drying allows early sanding which minimises production time

Specifications: Colour : Turbid in can, dries clear Build : High Sandability : Excellent Vertical Hold Up : Very Good Solvent Resistance : Good Water Resistance : Good Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Thinning : Thin up to 10% with MIROSOL 1222 or 1220 (Fast), 1294 (Medium), 1242 (Slow). Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Ideal for domestic furniture, children’s toys and furniture, picture frames, musical instruments, joinery and antique restoration.

Type: Sealer

Gloss Level:

Colour Type:

MIROCAT PC 3244 Clear Sealer

Code: 3244

High build, single pack, clear pre-catalysed sanding sealer provides an excellent base for a range of Mirotone topcoats.

Features:

High build provides improved hold up and reduces the number of coats required
Easy to use, achieve an excellent finish with minimal effort
May be catalysed with MIROBILD AC 3800 Universal catalyst to improve chemical resistance when using as a sealer under acid-catalysed and polyurethane topcoats
Fast drying allows early sanding which minimises production time

Specifications: Colour : Milky in can, dries clear Build : High Sandability : Excellent Vertical Hold Up : Very Good Solvent Resistance : Good Water Resistance : Good Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : To improve the water and chemical resistance of the coating system, add 20ml of MIROBILD AC 3800 Catalyst to every litre of MIROCAT PC 3244 and then add thinner. Apply catalysed coating within two days of adding catalyst. Pot Life : 2 days at 25°C Pot life varies significantly with ambient temperature, humidity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning : Thin 15-30% with MIROSOL 1222 or 1220 (Fast), 1294 (Medium), 1242 (Slow) Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Ideal for domestic furniture, children’s toys and furniture, picture frames, musical instruments, joinery and antique restoration. When catalysed and top coated with MIROBILD AC topcoats or MIROTHANE PU 5588 Clear Topcoat may be used on kitchen cabinets and commercial furniture.

Type: Sealer

Gloss Level:

Colour Type:

MIROTHANE PU 5631 White Undercoat

Code: 5631

Premium, high build, two pack polyurethane undercoat.

Features:

Fast drying, ideal for automatic lines with in-line or early forced drying
Easy to sand, powders easily making it ideal for hand sanding
Has a slight sheen making it easier to see where it has been sanded
Low sink back, produces and excellent high gloss finish when topcoated with one of Mirotone’s full gloss polyurethane topcoats, comparable with the gloss achieved with a polyester undercoat
Excellent vertical hold up

Specifications: Colour : White & Tinted Finish : Slight sheen Build : Very High Sandability : Excellent Vertical Hold Up : Excellent Solvent Resistance : Excellent Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated. Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner

To View Tech Data Sheet and Safety Data Sheet: Register To View

Application: Mixing Ratio (by volume) : 2 Parts 5631 Part A + 1 Part 5747 Part B (2A:1B) or 4 Parts 5631 Part A + 1 Part 5728 or 5735 (4A:1B) Pot Life : 2 hours at 25°C Pot life varies significantly with ambient temperature, humdity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning : Thin up to 40% with MIROSOL 1217 (Fast), 1263 (Medium) or 1218, 1266 (Slow). Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use. Interior doors, kitchen & bathroom cabinets, commercial joinery, wall panelling and domestic furniture.

Type: Undercoat

Gloss Level:

Colour Type: White, Tinted

MIROTHANE PU 5626 White Undercoat

Code: 5626

Premium grade, high solids, low viscosity two pack polyurethane undercoat. Very easy to sand and provides excellent DOI (Distinction of Image) when topcoated with a MIROTHANE PU topcoat gloss.

Features:

Easy to sand, powders easily making it ideal for hand sanding
High solids, low viscosity provides superior build with minimal thinning. Excellent for sealing the fibres of MDF.
Superior chemical and moisture resistance
Use up excess MIROTHANE PU 5650 topcoat by adding it into MIROTHANE PU 5626 to create your own tinted undercoat

Specifications: Colour : White, Black & Tinted Build : Very High Sandability : Excellent Vertical Hold Up : Excellent Solvent Resistance : Excellent Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ration (by volume) : 3 Parts 5626 Part A + 1 Part 5747 Part B (3A:1B) or 5 Parts 5626 Part A + 1 Part 5715, 5728 or 5735 (5A:1B) Pot Life : 2 hours at 25°C Pot life varies significantly with ambient temperature, humdity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning : Thin up to 20% with MIROSOL 1217 (Fast), 1263 (Medium), 1218, 1266 (Slow) Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use. Doors, kitchen & bathroom cabinets, commercial joinery and wall panelling and domestic furniture.

Type: Undercoat

Gloss Level:

Colour Type: White, Black & Tinted

MIROPOL PE 5130 White Undercoat

Code: 5130

A high build, white polyester undercoat for MDF and particleboard. It is easy to sand and is designed to be top coated with MIROTHANE PU polyurethane topcoats.

Features:

Easy to sand, will powder easily ensuring quick sanding
Excellent vertical hold up
Excellent flow
Excellent build, it will enhance the finished appearance of the topcoat by filling and covering the fibres of the substrate

Specifications: Colour : White Specific Gravity : 1.45 +/-0.05 Build : Excellent Sandability : Excellent Vertical Hold Up : Good Solvent Resistance : Very Good Water Resistance : Very Good Levelling & Flow : Very Good Sink Back : Minimal Coverage : 3m2 per litre at 300 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1208 or 1234 Thinner.

To View Tech Data Sheet and Safety Data Sheet: Register To View

Application: Mixing Ratio : Mix by volume, 1 Litre 5130 Part A + 20ml 5202 Accelerator + 10ml Peroxide (MEKP Catalyst) (100:2:1) Always mix 5202 Accelerator into the 5130 Part A base before adding the peroxide (MEKP Catalyst). Mixing the Accelerator and the Peroxide Hardener together may cause an explosion or fire. Pot Life : Approximately 45 minutes at 25°C. Pot life varies significantly with ambient temperature and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Refer to the MIROPOL PE Polyester Product Information Guide for mixing ratios to extend pot life. Thinning : Up to 30% with MIROSOL 1208, 1234 or 1224 Thinner. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Interior doors, kitchen & bathroom cabinets, commercial joinery and wall panelling and domestic furniture

Type: Undercoat

Gloss Level:

Colour Type: White

MIROBILD AC 3720 White Undercoat

Code: 3720

A high build, free sanding undercoat for use on wood, medium density fibreboard (MDF) or particleboard. Ease of sanding makes for faster throughput in a production situation.

Features:

High build, enhances the finished appearance of the topcoat and can be applied directly over MDF to seal the fibres
Easy to sand
Excess MIROBILD AC 3770 topcoat may be added into MIROBILD AC 3720 undercoat to create a tinted undercoat. This improves coverage and reduces waster of topcoat

Specifications: Colour : White Finish : N/A Build : Excellent Sandability : Excellent Vertical Hold Up : Excellent Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet: Register To View Application: Mixing Ratio (by volume) : 10 Parts MIROBILD AC 3720 Part A + 1 Part MIROBILD AC 3800 Universal Catalyst or MIROBILD AC 3810 Quick Dry Catalyst by volume. Mix A & B and then add thinner. Allow mixed product to stand for 15 minutes prior to thinning, this will ensure that maximum film hardness and clarity is obtained. Failure to allow time for reaction to take place may result in a hazy film. Pot Life : 1 day at 25°C Pot life varies significantly with ambient temperature, humdity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. Thinning : Thin up to 20% with MIROSOL 1220 (Fast), 1294 (Medium), 1242 (Slow) In hot or draughty conditions up to 10% MIROSOL 1218 Ultra Slow Thinner may be added. Do not exceed 10% addition as it will retard the drying and could lead to problems with sanding, printing and blocking. Use faster thinners to achieve the required viscosity and then use (only if required) a small amount of MIROSOL 1218 to improve flow and levelling. In damp, cool or high humidity conditions, up to 10% MIROSOL 1297 Retarder may be added to help prevent blushing (a milkiness or haze in the film). Heating the application environment e.g. warming with infra-red lamps and avoid spraying early in the morning and late evening when temperatures are at their coldest, will also help to reduce the risk. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Curtain Coating - Viscosity 40-50 seconds. Where To Use: Interior only. Domestic & commercial furniture, wardrobes, joinery and fixtures.

Type: Undercoat

Gloss Level:

Colour Type: White

MIROLAC NC 3130 White Undercoat

Code: 3130

A user friendly, single pack, pigmented undercoat for internal wood and medium density fireboard (MDF). It is fast drying with excellent sanding properties.

Features:

Easy to sand, powders easily reducing sanding time
Fast drying enables increased production throughput
Minimises the risk of wax extraction when applied over MDF and HDF
Single pack, no pot life issues to manage
Formaldehyde free. safer for the applicator, zero formaldehyde emissions in rooms in which articles are installed
Use up left over MIROLAC NC 3150 topcoat by adding MIROLAC NC 3130 to create your own tinted undercoats

Specifications: Colour : White Build : Good Sandability : Good Vertical Hold Up : Good Solvent Resistance : Good Water Resistance : Good Levelling & Flow : Very Good Sink Back : Minimal Coverage : 6m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Thinning: Thin 25-40% with MIROSOL 1222 or 1220 (Fast), 1294 (Medium), 1242 (Slow). Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Ideal for domestic furniture, internal doors, children’s toys and furniture and built in wardrobes.

Type: Undercoat

Gloss Level:

Colour Type: White

STRIPCOAT

Code: 3520

Temporary coating designed to provide a removable protective film to the inside of galvanised steel spray booths. This film can be easily removed to reduce unwanted overspray build up reducing the risk of dust contamination and the risk of fire.

Features:

Fast drying
White in colour, provides good light reflection when applied to internal spray booths
Dries to a strippable film when applied at the correct wet film thickness
Dries to a white flexible film

To View Tech Data Sheet: Register To View Where To Use: Galvanised steel spray booths only

Type: Other

Gloss Level:

Colour Type:

MIROLOK 3508 Glass Clean/Prime

Code: 3508

Easy to use, fast drying primer used to both clean glass and provide excellent adhesion to glass for MIROTHANE PU metallic, pearlescent or solid coloured topcoats.

Features:

Cleans and primes in one action
Easy to use, no mixing or pot life issues
Fast drying

Specifications: Recommended Topcoats: MIROTHANE PU 5605 mixed 2A:1B with 5789 MIROTHANE PU 5640 mixed 10A:1B with 5789 MIROTHANE PU 5650/30 mixed 3A:1B with 5735 or 1A:1B with 5747 MIROTHANE PU 5650/FG mixed 1A:1B with 5780 or 2A:1B with 5789 To View Tech Data Sheet: Register To View Application: Apply to glass with a clean, soft absorbent, lint-free cloth or if applying to a large area use a plastic trigger spray pack. Wipe wet surface vigorously in the same way you would a glass cleaner. Finish with a clean rag wiping hard enough to remove excess primer and the majority of the streaks. Where To Use: Glass splashbacks, toughened glass countertops, glass furniture and glass feature walls.

Type: Other

Gloss Level:

Colour Type:

MIROSTAIN 2616 Pigment Stain - Medium to Slow Dry (Solvent Based)

Code: 2616

High strength pigment stain designed to produce traditional strong stain colours that accentuate the grain.

Features:

Easy to use, results in a uniform colour
Universal application, can be applied by spraying, brushing or wiping
Excellent light stability for a pigment stain thereby providing more consistent and fade resistant colours
Can be added to MIROCAT PC, MIROBILD AC and MIROTHANE PU Clear Coatings for toning and shading to improve colour, depth and consistency

Specifications: Colour (Tint Strength) : TV - Ultra String Tint TX - Strong Tint TY - Medium Tint TZ - Light Tint Primary Colours : #5090 Yellow Oxide #6022 Burnt Umber #7007 Scarlet #8100 Phthalo Blue #9100 Phthalo Green #9999 Black Coverage : The coverage is determined by the application method and the strength of colour required Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using 1222, 1228 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Thinning : MIROSTAIN 2616 is supplied ready for use (RFU). However to achieve lighter tones reduce with MIROSOL 1222 (Fast), MIROSOL 1231 (Medium), 1242 (Slow) thinners or 1218, 1228, 1233 (Ultra Slow) thinners. MIROSTAIN 2616 must be unreduced when adding to MIROCAT PC, MIROBILD AC or MIROTHANE PU. Toning : required, to provide extra depth of colour, add up to 10% by volume of unreduced MIROSTAIN 2616 to MIROCAT PC or MIROBILD AC coatings. Apply in light even coats over sealed timber to obtain depth of colour. Pad or Rag - Use a clean lint free cloth, apply in even strokes. Suction Gun - Use 1.5mm (59 thou) orifice with 280kpa (35 psi). It is important not to apply MIROSTAIN above this pressure to avoid dark or blotchy discolouration. Pressure Pot - Use 1mm orifice with pressure pot air-cap. Gun pressure 280kpa (35 psi) and a pot pressure of 16kpa (2 psi) max. Airless Spray - Contact Mirotone’s Technical department. Air Mix Guns - Contact Mirotone’s Technical department. Where To Use: Interior use only. Pine furniture, architraves and skirting boards, internal doors, built-in wardrobes and joinery and fixtures.

Type: Stain

Gloss Level:

Colour Type:

MIROSTAIN 2101 Dye Stain - Fast Drying (Water Based)

Code: 2101

Low grain raising, water based stain designed to provide uniform colour with excellent clarity without masking the wood grain.

Features:

Low odour, low VOC, non flammable, no class 3 flammable goods storage required
Universal application, can be applied by spraying, wiping, brushing or dipping
Medium-slow dry speed, easy to apply resulting in a uniform applications
Excellent light stability for dye stain thereby proving more consistent and fade resistant colours

Specifications: Colour (Tint Strength) : TV - Ultra String Tint TX - Strong Tint TY - Medium Tint TZ - Light Tint Primary Colours : #5000 yellow #5067 Orange #7000 Red #7270 Crimson #8000 Blue #9999 Black Coverage : The coverage is determined by the application method and the strength of colour required Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using water To View Tech Data Sheet: Register To View Application: Thinning : MIROSTAIN 2101 is supplied ready for use (RFU). However to achieve lighter tones reduce with MIROSTAIN 2101 CTB. Pad or Rag - Use a clean lint free cloth, apply in even strokes. Suction Gun - Use 1.5mm (59 thou) orifice with 280kpa (35 psi). It is important not to apply MIROSTAIN above this pressure to avoid dark or blotchy discolouration. Pressure Pot - Use 1mm orifice with pressure pot air-cap. Gun pressure 280kpa (35 psi) and a pot pressure of 16kpa (2 psi) max. Airless Spray - Contact Mirotone’s Technical department. Air Mix Guns - Contact Mirotone’s Technical department. Where To Use: Interior use only. Pine furniture, architraves and skirting boards, internal doors, built-in wardrobes and joinery and fixtures.

Stain Colour Charts

When choosing a colour for your project it is important to consider the type of timber finish you require for your chosen project. The choice of timber stain is crucial as the surface will need to withstand general wear and tear and environmental factors. It is also important to consider the type of timber used for the project. Final colour appearance may vary with different timber species, texture, size and shape of the area. Stain colours available in 4L, 20L and 205L. Need more information about our colour range? Contact Mirotone

Type: Stain

Gloss Level:

Colour Type:

MIROSTRIP 1019 Paint Stripper

Code: 1019

General purpose paint stripper suitable for stripping most types of paint from timber and metal surfaces.

Features:

Ready for use
Apply by brush

Specifications: Clean Up : Clean all equipment using MIROSOL 1228 or 1231. Metal surfaces may be hosed down with a high pressure water jet wash. Application: Apply a thick film by brush. Allow to stand for 3 to 5 minutes (most paints will bubbles and wrinkle). Remove with a wide metal scraper. MIROSTRIP may be left longer (10-30 minutes) for more difficult to remove paints. Sanding the surface prior to application of MIROSTRIP 1019 with 180 grit sandpaper can help the stripper to penetrate the coating. Ensure that all MIROSTRIP 1019 is thoroughly removed before coatings (sand with 180-240 grit sandpaper to remove residue). Where To Use: Removes most type of paint; nitrocellulose, precatalysed lacquers, alkyd paints, acid catalysed and polyurethane coatings.

To View Tech Data Sheet and Safety Data Sheet: Register To View

Type: Other

Gloss Level:

Colour Type:

MIROFIL 1702 Wood Filler

Code: 1702 Easy to use, single-pack wood filler used to produce a closed-pore finish.

To View Tech Data Sheet and Safety Data Sheet: Register To View

Type: Other

Gloss Level:

Colour Type:

Antimicrobial Coatings

Type:

Gloss Level:

Colour Type:

Intumescent Fire-Retardent

XEROFIRE High Performance Clear Intumescent Coating System

A unique range of leading technology, professional wood finishing products formulated to upgrade (or maintain) the fire-rating of a wide variety of wood-based substrates including veneered panels, solid hard- and softwoods, plywood, MDF and wood-composite boards. The xerofire® Fire Retardant Coatings system comprises of a 2K Waterborne Intumescent Basecoat in combination with a 2K Acid Catalyst Clear Topcoat providing a high quality, furniture-grade finish. For further information Contact Us. XEROFIRE Coating System Brochure A clear coat intumescent system designed to achieve GROUP 1S (New Zealand only) on timber and timber related products. Download Brochure. XEROFIRE Technical Data Sheet A unique range of leading technology, professional wood finishing products formulated to upgrade (or maintain) the fire-rating of a wide variety if wood-based substrates including veneered panels, solid hard and softwood’s, plywood, MDF and wood-composite boards. To View Tech Data Sheet: Register To View

Type:

Gloss Level:

Colour Type:

MIROCURE UV Coatings

Mirotone is a leading supplier of UV Coatings in Australia with over 50 years experience in UV technology, Mirotone has a large range of coatings & the technical expertise to find the tailored solution for each specific customer. The MIROCURE UV range of consists of three application methods including spray, roller coat and vacuum coater applied. Our in situ applied floor coatings are designed for the Australian environment and offer a complete product range including water based floor coatings, moisture cures, polyurethanes and oil based floor coatings, solvents, thinners, additives and floor maintenance products. MIROCURE UV Coatings (Spray Applied): Mirotone has a large range of MIROCURE UV coatings suitable for application by automated spray equipment. Typical applications include wall panelling, mouldings, interior furniture and fittings and hard wearing panel work. MIROCURE UV Coatings (Roller Coat Applied): Mirotone has a wide range of MIROCURE UV coatings suitable for application by roller coater. Typical applications consist of wall panelling and timber flooring. MIROCURE UV Coatings (Vacuum Coater Applied): Mirotone has a range of MIROCURE UV coatings suitable for application by vacuum coater. Typical applications include blinds and shutters, wall panelling and mouldings. To find out more about Mirotone’s Range of MIROCURE UV Coatings Contact Us for more information.

Type:

Gloss Level:

Colour Type:

Solvent Based Glass Coatings

Mirotone’s glass coatings system offers a simple three step coating process that is easy to apply, fast drying and versatile. The excellent adhesion of this system gives applicators peace of mind during installation and whilst in service. MIROTHANE PU 5640 Metallic / Pearlescent Tint Base: A fast drying, two pack polyurethane available in a stunning range of vibrant metallic and pearl finishes. MIROTHANE PU 5605 Pigment Topcoat: A premium two pack polyurethane topcoat. It has excellent flow and levelling and drying characteristics and has excellent chemical resistance. MIROTHANE PU 5650 Pigmented Topcoat: A user friendly two pack polyurethane with excellent resistance to water, general household contaminates, marring and scuffing.

Type:

Gloss Level:

Colour Type:

Water Based Glass Coatings

Mirotone is the sole distributor of the ICA Glass Paint Series in Australia (ICA group of Italy), the range includes water based coatings and a unique tintometric system that allows you to add value to glass by providing beauty, colour, texture and enhanced safety. The system enables users to produce an unrivalled array of colours, effects and textures, whilst delivering excellent performance proven under stringent testing; testimonials from users claim that this is the first time that the market has access to this level of adhesion, chemical & physical resistance and light stability, while being user friendly and versatile. Low VOC (volatile organic compounds) and non- flammable, these coatings are ideal for applications where there are limitations on solvent emissions. ICA Glass Paint Series Solid & Metallic: High performance, water based paint to protect both solid & metallic colours on lass. Easy to use, single application. Contact us for more information.

Type:

Gloss Level:

Colour Type:

Shipping Containers

MIROKEY VY 6615 Etch Primer will provide superior adhesion to a wide variety of metals, while MIROTHANE PU PU 5629 Polyurethane Primer will provide a high build undercoat that can be sanded. MIROTHANE PU 5610 Acrylic Topcoat will ensure excellent exterior durability, protecting equipment against harsh weather and surrounding environmental conditions. MIROTHANE PU 5610 is designed to provide a high gloss, durable finish for shipping containers, boats and ships. Metal skip bins are commonly used to hold open-topped loads of construction, demolition waste, rubbish and recycled materials. Mirotone has a coating system ideal for the refurbishment of skip bins. Mirotone coatings are designed to be applied over raw steel and provide a protective and decorative coating for skip bins. MIROKEY 6615 Etch Primer: Is a high performance, zinc phosphate etch primer specifically designed for direct application over mild steel, zinc-anneal, chrome, brass, lead and lead alloys, stainless steel, aluminium and galvanised iron.

Excellent adhesion to a variety of cleaned metal surfaces
Single pack, easy to use
Contains zinc phosphate, proven corrosion resistance
Fast drying

MIROTHANE PU 5610 Pigmented Topcoat: A high performance, two pack, acrylic modified polyurethane coating. This is a high gloss polyurethane which has superior coverage and excellent durability. MIROTHANE PU 5610 also has superior adhesion over a wide variety of substrates.

Outstanding durability, gloss and colour retention
Excellent opacity, achieve a high gloss finish with minimal coats

Type:

Gloss Level:

Colour Type:

Machinery / Earth Moving Equipment

Machinery

All machinery whether new or old will require refurbishment or painting straight from the factory line. MIROKEY ZP 6940 Zinc Phosphate Primer and MIROLON AK 6980 High Gloss Topcoat are designed to provide a decorative and protective surface to all metal surfaces. This coating system can be applied to all metal objects including farm equipment, lawn mowers, tractors, harvesters and a variety of metal trailers. (Refer to technical for further information).

MIROPRIME ZP 6940 Zinc Phosphate Primer: Is a fast drying, single pack, high build, high solids pigmented zinc phosphate primer for exterior and interior metal surfaces. MIROPRIME ZP 6940 is an anti-corrosive shop / field primer designed for light industrial and commercial environments. Coupled with excellent drying properties and a smooth surface, it is an ideal based to be top coated with MIROLON AK 6980.

High build coating provides a protective film for limited exterior exposure
Single pack, no pot life issues to manage
Superior coverage provides the best possible coverage with minimal coats applied
Fast drying, faster handling and shipping

MIROLON AK 6980 High Gloss Topcoat: Is a user friendly, single pack, pigmented topcoat ideal for light industrial metal fixtures and transportable containers such as trailers, rubbish / skip bins and metal fabrications. MIROLON AK 6980 is a high build coating that dries to a high gloss finish. MIROLON AK 6980 can be applied directly over bare metal to achieve a high build coating system.

An easy to apply coating that can be applied directly over bare metal when needed
Excellent build reduces the number of topcoat required
Single pack, no pot life issues to manage
Formaldehyde free, safer for the applicator, zero formaldehyde emissions
Isocyanate free

Earth Moving Equipment

This superior, tough coating system has been designed to protect earth moving equipment against Australia’s harsh elements:

MIROKEY VY 6615 Etch Primer provides superior adhesion to a wide range of metals.
MIROTHANE PU 5629 Pigmented 2K Primer provides a higher build undercoat that can be sanded.
MIROTHANE PU 5610 Acrylic Topcoat provides excellent exterior durability which ensures that the coated equipment is protected against the harsh weather and environmental conditions.
MIROTHANE PU 5610 is designed to provide a high gloss, durable finish for bulldozers, graders, bobcats and all forms of earth moving equipment and mining equipment

MIROKEY 6615 Etch Primer: Is a high performance, zinc phosphate etch primer specifically designed for direct application over mild steel, zinc-anneal, chrome, brass, lead and lead alloys, stainless steel, aluminium and galvanised iron.

Excellent adhesion to a variety of cleaned metal surfaces
Single pack, easy to use
Contains zinc phosphate, proven corrosion resistance
Fast drying

MIROTHANE PU 5629 Pigmented 2K Metal Primer: Is a premium grade, high solids, low viscosity polyurethane primer for metal. Its excellent sanding properties provide an excellent base for MIROLON enamel and MIROTHANE PU polyurethane topcoats.

Easy to sand, powders easily making it ideal for hand sanding
High solids, low viscosity provides superior build with minimal thinning
Superior chemical and moisture resistance
Fast drying properties ensure early recoat and faster shipping & handling times

Outstanding durability, gloss and colour retention
Excellent opacity, achieve a high gloss finish with minimal coats

Type:

Gloss Level:

Colour Type:

Skip Bins

Metal skip bins are commonly used to hold open-topped loads of construction, demolition waste, rubbish and recycled materials. Mirotone has a coating system ideal for new skip bins in an easy to follow two step system comprising of MIROPRIME ZP 6940 Zinc Phosphate Primer and MIROLON AK 6980 High Gloss Enamel. The refurbishment of skip bins couldn’t be simpler with MIROPRIME ZP 6935 Zinc Phosphate Primer and MIROLON AK 6960 Gloss Enamel Topcoat. Mirotone coatings are designed to be applied over raw steel and provide a protective and decorative coating for skip bins.

New Skip Bins

MIROPRIME ZP 6940 Zinc Phosphate Primer: Is an anti-corrosive, high build, high solids, single pack (no pot life issues), provides a fast drying base coat that results in a smooth, superior finish.

High build coating provides a protective film* refer to datasheet
Single pack, no pot life issues to manage
Superior coverage provides the best possible coverage with minimal coats applied.
Fast drying, faster handling and shipping

MIROLON AK 6980 High Gloss Enamel: A full gloss, pigmented topcoat that can be colour matched to suit any colour. Easy to apply, single pack, formaldehyde and Isocyanate free formula is safer for both the applicator and means zero formaldehyde emissions.

Apply directly over bare metal when needed
Excellent build reduces the number of topcoats required
Single pack, no pot life issues
Formaldehyde free, safer for the applicator, zero formaldehyde emissions
Isocyanate free

Refurbishing Skip Bins

MIROPRIME ZP 6935 Zinc Phosphate Primer: Anti corrosive, high build, high solids, single pack (no pot life issues), superior coverage primer – provides the best possible base with one coat. Fast drying ensures faster handling and shipping.

High build coating provides a protective film *refer to datasheet
Single pack, no pot life issues to manage
Superior coverage provides the best possible coverage with minimal coats applied
Fast drying, faster handling and shipping

MIROLON AK 6960 Gloss Enamel: A full gloss, pigmented topcoat that can be colour matched to suit any colour. Easy to apply, single pack, formaldehyde and isocyanate free formula is safer for both the applicator and means zero formaldehyde emissions.

Apply directly over bare metal when needed
Excellent build reduces the number of topcoat required
Single pack, no pot life issues to manage
Formaldehyde free, safer for the applicator, zero formaldehyde emissions
Isocyanate free

Type:

Gloss Level:

Colour Type:

Metal Fabrication (Metal Door Frames)

MIROPRIME ZP 6940 Zinc Phosphate Primer: Anti corrosive, high build, high solids, single pack (no pot life issues), shop field primer – provides a fast drying base coat which results in a smooth, superior coverage finish. Topcoat – Paint onsite with a wide range of decorative paints.

High build coating provides a protective film *refer to datasheet
Single pack, no pot life issues to manage
Superior coverage provides the best possible coverage with minimal coats applied
Fast drying, faster handling and shipping

Type:

Gloss Level:

Colour Type:

Truck Bodies

Mirotone’s range of metal coatings that are designed to withstand the harsh Australian conditions. Out two step coating system is ideal for painting truck bodies and trays. It is designed to be applied over raw steel to provide a protective and decorative finish.

MIROKEY VY 6615 Etch Primer: Anti corrosive, high performance, single pack (no pot life issues), etch primer – provides a fast drying base coat with excellent adhesion on metal surfaces.

Excellent adhesion to a variety of cleaned metal surfaces
Single pack. easy to use
Contains zinc phosphate, proven corrosion resistance
Fast drying

MIROTHANE PU 5610 Pigmented Pigmented Topcoat: A full gloss, pigmented topcoat that can be colour matched to suit any colour. Easy to apply, two pack coating exhibits outstanding durability and colour retention to a variety of metal substrates.

Outstanding durability, gloss and colour retention
Excellent opacity, achieve a high gloss finish with minimal coats

Type:

Gloss Level:

Colour Type:

MIROWAX 738 Finishing Wax

Code: 1012-002

Environmentally friendly, wax polish made from a blend of beeswax and tree oils, designed to clean, seal and protect while providing a protective, heat and alcohol resistant coating. This natural wax finish is designed to produce a low gloss lustre or where the appearance of natural timbers is to be enhanced.

Ready For Use: Apply straight from the can with a soft rag as a furniture polish or reviver.

Specifications:

Colour : Natural
Finish : Mineral Turps

To View Tech Data Sheet: Register To View

Application:

Wipe - Soak steelwool (00 or 000 grade) with MIROWAX 738 mixed with 1:1 mineral turps. Rub in the direction of the grain to a smooth finish. Remove excess with a clean soft lint free cloth.

Spray - Lightly denib the surface with 400 grit sandpaper. Dilute MIROWAX 738 1 part to 2-3 parts mineral turps. Spray a light coat over the surface. Remove excess with a soft lint free cloth.

Where To Use: Children's toys, furniture, trophey bases & carved ornaments and articles.

Type:

Gloss Level:

Colour Type: Natural

SPRAYGLOW

Code: 1012004 Lightly perfumed, silicone-free furniture polish which has been specifically formulated to clean and protect both lacquered and unlacquered wooden articles. Features:

Spray Glow is suitable for cleaning and protecting any low gloss surface, including laminated bench tops and cupboards.

Colour : Clear Finish : Low Gloss Application: Apply a light even coat, hold can approximately 30cm from the article being coated. Wipe with a soft cloth. Where To Use: Furniture polish. low gloss kitchen cupboards, laminex benchtops (low gloss) To View Tech Data Sheet: Register To View

Type: Other

Gloss Level: Low Gloss

Colour Type: Clear

MIROLOK 3512 Clear Plastic Primer

Code: 3512 Very fast drying, clear primer that provides excellent adhesion to plastic, acrylic, vinyl and LPM. Features: Easy to use, no mixing or pot life issues Fast drying Excellent adhesion No sanding required To View Tech Data Sheet and Safety Data Sheet: Register To View Application: All substrates must be free from dust, grease, dirt and all other contaminants before proceeding. Contaminants may be removed by washing the substrate with MIROSOL 1231 Wax & Grease Remover. Apply a light even coat of MIROLOK 3512 per the Application Methods section. Where To Use: Low pressure melamine (LPM), plastic substrates such as polypropylene, polyethylene and vinyl, acrylic substrates including PMMA and Perspex and DAP board. Note: there are a wide range of plastic and acrylic substrates with different chemical compositions available in the market place, it is therefore essential that the user tests the adhesion of MIROLOK 3512 as part of the full coating system on a test sample before commencing commercial production. Read More

MIROLON 6980 AEROSOL

Code: 1012-6980-0001 High gloss white enamel. To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROKEY VY 6640 AEROSOL

Code: 1012-6640-9999 Black etch primer. To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROLAC NC 3125 AEROSOL

Code: 1012-3125-0001 White nitrocellulose undercoat. Features: Our range of MIROMET Aerosols have all the protection and performance you have come to expect with Mirotone Coatings. Our MIROMET Aerosol range includes: MIROKEY VY 6615 Grey Etch Primer MIROKEY VY 6640 Black Etch Primer MIROLON AK 6980 White High Gloss Topcoat MIROLAC NC 3125 Universal White Undercoat Specifications: Colour: White Finish: Grey & Black Coverage: Primer, Undercoat & Topcoat, Approximately 2 square metres per can depending on the colour Packaging: 300 gram aerosol can To View Tech Data Sheet and Safety Data Sheet: Register To View Application: The nozzle produces a fan shaped spray similar to a professional spray gun. Spray with smooth, even horizontal strokes about 10-15cm from the job. Apply until coverage is obtained. In cold weather warm can to room temperature for optimum spraying performance. Touch dry in 20-30 minutes but allow overnight drying before handling. If second coat is required, recoat within 10-15 minutes or after 24 hours. If in doubt, test in a non-critical area. Where To Use: Touch ups Read More

MIROKEY VY 6615 AEROSOL

Code: 1012-6615-2158 Grey etch primer. To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROKEY VY 6615 Etch Primer

Code: 6615 High performance, zinc phosphate etch primer specifically designed for direct application over mild steel, zinc-anneal, chrome, brass, lead and lead alloys, stainless steel, aluminium and galvanised iron. Features: Excellent adhesion to a variety of cleaned metal surfaces Single pack, easy to use Contains zinc phosphate, proven corrosion resistance Fast drying Specifications: Colour : White or Grey Build : Good Vertical Hold Up : Excellent Solvent Resistance : Dependent on topcoat Water Resistance : Very Good Levelling & Flow : Very Good Sink Back : Minimal Coverage : 7-10m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1234 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Thinning : Thin 5 to 15% with MIROSOL 1234 or 1286 Fast or 1294 Medium Thinner. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Metal fabrication, box trailers, caravans, safes, plant & machinery, farming equipment, earth moving equipment, skip bins and automotive. Read More

MIROTHANE PU 5629 Undercoat

Code: 5629 A premium grade, high solids , low viscosity polyurethane primer for metal. Features: Easy to sand, poweders easily making it ideal for hand sanding High solids, low viscosity provides superior build with minimal thinning Superior chemical and moisture resistance Fast drying properties ensure early recoat and faster shipping & handling times Specifications: Colour : White, black tinted Finish : N/A Build : Very High Sandability : Excellent Vertical Hold Up : Excellent Solvent Resistance : Excellent Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6 -7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 Thinner Packaging : 4 -16L To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : 3 parts 5629 Part A + 1 part 5747 Part B (3A:1B) Pot Life : 2 hours at 25°C (refer to datasheet) Thinning : Thin up to 20% with MIROSOL 1217 (Fast), 1265 (Medium), 1266 (Slow), 1218 (Ultra Slow) Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior & exterior applications suitable for some automotive plastic & plastic parts, metal structural frames, machinery, caravans & earthmoving equipment. Read More

MIROTEC WB 8126 Water Based Undercoat

Code: 8126 A pigmented, single pack, water based undercoat that may be applied by spray, it is especially suited for application on automatic lines. Features: Single pack, no pot life issues to manage and less waste of product. Excellent sanding, powders easily. Low VOC (solvent content), non-flammable, low odour safer for workers and the environment. Complies with the Green Bui;ding Council Australia: Green Star - Office Design v3 & Office As Built, Table IEQ-13.1 Maximum TVOC Content Limits for Paints, Varnishes and Protective Coatings. Mould resistant, contains fungal biocides for in-can stability and protection against discolouration from fungal / mould stains once applied. Specifications: Build: Good Sandability: Excellent Vertical Hold-Up: Very Good Solvent Reistance: Good Water Resistance: Excellent Levelling & Flow: Excellent Sink Back: Minimal Colour: White Coverage: 10m2 per litre at 100 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated. Dry Time: Dust Free: 8-12 minutes Touch Dry: 10-15 minutes Sanding: 30-40 minutes Block Stacking: 24 hours To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROPOL PE 5007 High Gloss Clear Topcoat

Code: 5007 A high build, isocyanate free, two pack polyester, clear coating. MIROPOL 5007 Clear has a very hard, high gloss clear topcoat finish to provide a “glass like” appearance. Features: High Build Very High Gloss MIROPOL 5007 Clear can be applied to both natural timber substrates or foil covered MDF board. For interior use only. Specifications: Colour : Clear Finish : Full Gloss Build : Excellent Sandability : Good Vertical Hold Up : Good Solvent Resistance : Excellent Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 8m2 per litre at 100-150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1215 Thinner Packaging : 20L To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : Mix 1 part by volume MIROPOL 5007 Clear Topcoat to 1 part by volume MIROPOL 5007 "B" Solution and stir thoroughly. Pot Life : 2-3 hours (mix only samll quantities at any one time). Thinning : Not required as MIROPOL 5007 Clear us supplied ready for ysue (RFU). If required use MIROSOL 1234 Ultra Fast Thinner sparingly. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use. Solid and veneer timber fixtures and furniture. Restaurant, bar, and hotel furniture. Piano's. Funeral caskets and shop fittings Read More

MIROSOL 1294 Medium Lacquer Thinner

Code: 1294 To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROSOL 1281 Matt Promoter

Code: 1281 To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROSOL 1280 Fast Polyurethane Thinner

Code: 1280 Fast polyurethane thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROSOL 1266 Med/Slow Polyurethane Thinner

Code: 1266 To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROSOL 1265 Medium Polyurethane Thinner

Code: 1265 To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROSOL 1260 Slow Polyurethane Thinner

Code: 1260 To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROSOL 1234 Ultra Fast Primer Thinner

Code: 1234 To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROSOL 1231 Wax & Grease Remover

Code: 1231 Read More

MIROSOL 1228 Mineral Turps

Code: 1228 To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROSOL 1222 Fast Lacquer Thinner

Code: 1222 To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROSOL 1220 Fast Lacquer Thinner

Code: 1220 To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROSOL 1218 Ultra Slow Polyurethane Thinner

Code: 1218 To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROSOL 1217 Fast Polyurethane Thinner

Code: 1217 To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROSOL 1215 Gunwash

Code: 1215 Ultra fast thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROSOL 1208 Acetone Ultra Fast Thinner

Code: 1208 To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROTEC WB 8060 Clear Topcoat

Code: 8060 Clear, single pack, water based topcoat. It is easy to apply and low yellowing. Features: Single pack, no pot life issues to manage and less waste of product Water white and low yellowing, it is ideal for use over blonde timbers and liming stains To minimise the risk of sink back and tannin bleed and achieve the best possible water and chemical resistance, apply MIROTHANE PU 5500 Clear Isolator mixed 10A:1B with MIROTHANE PU 5789 Hardener, as a first coat on bare wood Higher solids content than clear nitrocellulose and precatalysed lacquers with similar chemical resistance to clear precatalysed lacquers. Low VOC (solvent content), non-flammable, low odour, safer for workers and the environment Formaldehyde free, zero formaldehyde emissions in rooms in which coated articles are installed or used Isocyanate free, does not require air assisted face masks or other respiratory personal protective equipment for application Phthalate free, it is ideal for children’s toys Complies with the Green Building Council Australia: Green Star – Office Design v3 & Office As Built, Table IEQ-13.1 Maximum TVOC Content Limits for Paints, Varnishes and Protective Coatings Specifications: Colour : Clear Finish : Matt (10%), Satin (30%) & Semi Gloss (60%) Build : Good Sandability : Excellent Vertical Hold Up : Very Good Solvent Resistance : Good Water Resistance : Good Levelling & Flow : Excellent Sink Back : Minimal Coverage : 7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment with water following use. Refer to Technical Data Sheet for further information To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Thinning : Thin 10-15% with water depending upon application requirements. In cold conditions or when a faster dry time is required, MIROSTAIN 2101 Clear Tint Base (CTB) may be used to thin MIROTEC WB 8060. Note: only thin the volume of MIROTEC WB 8060 required for the job at hand. Once thinned the viscosity will continue to fall during the next 24 hours. If the application viscosity is too low, mix with some unthinned MIROTEC WB 8060 to bring the viscosity back up to the target. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Ideal for domestic and commercial furniture, children’s toys and furniture, picture frames, musical instruments, joinery and antique restoration. Read More

MIROTHANE PU 5650 Pigmented Topcoat

A premium, two pack, fast cure polyurethane topcoat that has been formulated to have superior resistance to water, general household contaminants, marring and scuffing. Available in a full range of gloss levels. Features: Available in an extensive colour range or tintable to a colour sample Excellent flow and levelling results in a smooth even finish With the application of the recommended undercoat or primer may be applied over wood, MDF, melamine, glass, metal and plastic Specifications: Colour : White & Tinted Colours Finish : Satin (30%), Semi Gloss (60%) & Full Gloss Build : Very Good Sandability : Good Vertical Hold Up : Good Solvent Resistance : Excellent Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 8m2 per litre at 125 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner Packaging : 1-16L To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : Refer to Technical Data Sheet. Pot Life : Satin & Semi Gloss: > 8 hours Full Gloss: 2 – 8 hours Pot life varies significantly with ambient temperature, humidity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning : Satin & Semi Gloss – Thin 40-55% with MIROSOL 1217 (Fast), 1263 (Medium), 1266, 1218 (Slow) when using high solids Part B. When using Ready For Use (RFU) Part B’s thin 30-40%. Full Gloss – thin up to 25% with MIROSOL 1263 (Medium), 1260, 1266, 1218 (Slow) when using high solids Part B. When using RFU Part B’s thin 20-30%. MIROSOL 1281 Matt Promoter may be added to MIROTHANE PU 5650 Satin at an addition rate of 30-40% to achieve an approximate gloss level of 10-15%. In order to maintain consistency of colour and gloss during a job or repeat jobs of the same colour, it is critical to use the same Part B Hardener and thinner throughout. To speed up dry time add up to 3% MIROTHANE PU 5795 Accelerator. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use. Interior doors, kitchen & bathroom cabinets, commercial joinery and wall panelling and domestic furniture. With the appropriate primers may be used to topcoat glass, plastic and metal. Read More

MIROTHANE PU 5608 Pigmented Topcoat

Code: 5608 MIROTHANE PU 5608 is an economical, user friendly, two pack pigmented polyurethane topcoat for quality furniture and fittings. Features: Excellent flow, high build and quick drying Economical, cost effective furniture grade polyurethane Specifications: Colour : White, full colour range Finish : Matt (10%), Satin (30%) & Semi-Gloss (60%) Build : Very Good Sandability : Very Good Vertical Hold Up : Excellent Solvent Resistance : Very Good Water Resistance : Very Good Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1215 or 1217 Thinner Packaging : 1, 4 & 16L To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : Refer to Technical Data Sheet. Pot Life : 6-8 hours at 25°C (Refer to Technical Datas Sheet). Thinning : Thin 20-40% with MIROSOL 1280 (fast), 1265 (medium), 1266 (Slow) Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Domestic furniture, commercial joinery, kitchen and bathroom cabinetry. Read More

MIROTHANE PU 5610 Pigmented Topcoat

Code: 5610 High performance, two pack, acrylic modified polyurethane coating. MIROTHANE PU 5610 has superior adhesion over a wide variety of substrates. Features: Outstanding durability, gloss and colour retention Excellent opacity, achieve a high gloss finish with minimal coats Specifications: Colour : White and Tinted Colours Finish : Gloss Build : Good Sandability : Good Vertical Hold Up : Good Solvent Resistance : Excellent Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mix Ratio (by volume) : 4 Parts 5610 Part A + 1 Part 5789 Part B (4A: 1B). Pot Life : Up to 10 hours Pot life varies significantly with ambient temperature, humidity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning : 25-40% with MIROSOL 1266 (fast), 1260 (Medium), 1218 (Slow) thinner. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Petrochemical industry, road tankers, tank farms, marine environment, concrete mixing bowls, trailers, horse floats, truck chassis, automotive, CFC toilet partitions. Read More

MIROTHANE PU 5588 Clear Topcoat

Code: 5588 User friendly, easy to apply, clear polyurethane topcoat. Excellent flow and quick drying ensures an excellent finish and increased throughput. Features: Can be applied over a range of sealers including MIROCAT PC 3241 and MIROCAT PC 3242 Preact Sealers and MIROTHANE PU 5533 and MIROTHANE PU 5545 Polyurethane Excellent flow and levelling Economical – a cost effective furniture grade polyurethane topcoat Specifications: Colour : Clear Finish : Satin (30%) and Satin (20%) Build : Very Good Sandability : Very Good Vertical Hold Up : Good Solvent Resistance : Very Good Water Resistance : Very Good Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : 4 Parts 5588 Part A + 1 Part 5747 Part B (4A:1B) or 10 Parts 5588 Part A + 1 Part 5715, 5728, 5735 or 5757 (10A:1B) Pot Life : 4-6 hours at 25°C Pot life varies significantly with ambient temperature, humdity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning : Thin 20-40% with MIROSOL 1217 (Fast), 1263 (Medium), 1266 (Slow) Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Domestic furniture, commercial joinery and kitchen cabinets Read More

MIROTHANE PU 5578 Clear Natural Topcoat

Code: 5578 High performance, fast drying, clear, two pack, non-yellowing, acrylic polyurethane for interior wood and wood composites. It has a natural matt finish and has outstanding durability, flexibility and colour stability. Features: Contains UV absorbers and light stabilisers that have been proven highly effective in protecting reconstituted, dyed and natural wood veneers from colour change when exposed to ultraviolet (UV) light Low gloss is resistant to unsightly oily fingerprints. Fingerprints can be easily removed with a clean lint free cloth without leaving residual glossy spots, particularly important when applying a clear matt topcoat over a dark base Fast drying Mould resistant – under normal atmospheric conditions. (i.e. article is kept in a properly ventilated room by either open windows or used in a room with air extractor fans) Specifications: Colour : Clear Finish : 5% and 20% Build : Good Sandability : Good Solvent Resistance : Very Good Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : Matt & Satin: 5 Parts 5578 Part A + 1 Part 5735 Part B (5A:1B), MIROTHANE PU 5747 may also be used in Matt. Pot Life : Up to 24 hours at 25°C Pot life varies significantly with ambient temperature, humidity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning : Thin 30% with MIROSOL 1217 (Fast), 1266 (Slow), 1218 (Ultra Slow) Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior: Reconstituted, dyed and natural wood veneers, joinery, kitchen cupboards, wardrobes, wall panelling, furniture-table topcoat, bench tops, commercial furniture and fit-outs, window furnishings and blinds. Read More

MIROTHANE PU 5577 Sun Shield Clear Topcoat

Code: 5577 High-performance, clear, two-pack, non-yellowing, acrylic polyurethane for interior wood & wood composites. MIROTHANE PU 5577 Sun-Shield contains a sophisticated package of UV absorbers and light stabilisers that have been proven highly effective in protecting reconstituted, dyed and natural wood veneers from colour change when exposed to ultraviolet (UV) light. Features: Contains UV absorbers and light stabilisers that have been proven highly effective in protecting reconstituted, dyes and natural wood veneers from colour change when exposed to ultraviolet (UV) light. High solids means less coats are required to achieve a full finish Subdued gloss is highly resistant to unsightly oily finger prints. Fingerprints can be easily removed with a clean rag without leaving residual gloss spots, particularly important when applying a clear matt topcoat over a dark base Available in a full range of gloss levels; matt, satin, semi-gloss and full gloss Specifications: Colour : Clear Finish : Matt (10%), Satin (30%), Semi Gloss (60%) & Full Gloss Build : Very Good Sandability : Good Vertical Hold Up : Good Solvent Resistance : Very Good Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1208 or 1234 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : Matt & Satin: 4 Parts 5577 Part A + 1 Part 5735 Part B (4A:1B) Full Gloss: 4 Parts 5577 Part A + 1 Part 5757 or 5789 (4A:1B) Pot Life : Up to 8 hours at 25°C Pot life varies significantly with ambient temperature, humidity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning : Matt & Satin: Thin 40-60% with MIROSOL 1217 (Fast), 1263 (Medium), 1266 (Slow), 1218 (Ultra Slow) Full Gloss: Thin up to 15% with MIROSOL 1263 (Medium), 1266 or 1260 (Slow), 1218 (Ultra Slow) Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior: Reconstituted, dyed and natural wood veneers, kitchen cupboards, wall panelling, table topcoat, bench tops, commercial furniture and fit-outs, window furnishings and blinds, children’s toys. Semi Exterior: Covered entry doors and internal faces of opening windows. Exterior: When used as a protective clear topcoat over an exterior grade pigmented basecoat e.g. MIROTHANE PU 5610 polyurethane on metal, plastic or over appropriately primed carbon fibre. Read More

MIROTHANE PU 5555 Clear Topcoat

Code: 5555 Premium, two pack, clear polyurethane. High clarity results in striking grain definition and enhances the natural beauty of stained timber. Features: Excellent water and chemical resistance makes it ideal for demanding in-service environment such as marine fit-outs, bench tops and bar tops Very low yellowing, it is suitable for use over light coloured wood and veneers when mixed with a low yellowing MIROTHANE PU Part B Hardener The full gloss version results in a brilliant high gloss finish with excellent distinction of image (DOI). Available in satin, semi gloss and full gloss Specifications: Colour : Clear Finish : Satin (30%), Semi Gloss (60%) & Full Gloss Build : Very Good Sandability : Excellent Vertical Hold Up : Good: Excellent Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : Refer to datasheet for mixing ratios Pot Life : 2-3 hours at 25°C Pot life varies significantly with ambient temperature, humdity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning : Refer to datasheet for thinning Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Ideal for demanding environments such as bar, kitchen bench tops, bathroom vanities, interior marine fit-outs and commercial fit outs. Read More

MIROBILD AC 3750 Pigmented Topcoat

Code: 3750 A high solids, pigmented, acid catalysed topcoat. Features: High build, ehances the finished appearance by providing maximum build with the minimum number of coats Bright white and low yellowing which minimises discolouration of light coloured coatings Excess MIROBILD AC 3750 topcoat may be added into MIROBILD AC 3720 undercoat. This improves coverage and reduces waste Specifications: Colour : White & Colours as requested Finish : Satin (30%), Semi Gloss (60%) & Full Gloss Build : Excellent Sandability : Excellent Vertical Hold Up : Excellent Solvent Resistance : Excellent Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1215 Thinner Packaging : 1, 4, 20L To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : Refer to Technical Data Sheet. Pot Life : 1 - 2 days art 25°C (Refer to Technica Datasheet). Thinning : Thin up to 25% with MIROSOL 1294 (Medium Thinner) - (Refer to Technica Datasheet). Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use. Domestic & commercial furniture, wardrobes, kitchen cupboards and doors. Read More

MIROBILD AC 3606 Clear Topcoat

Code: 3606 Low odour, low formaldehyde, isocyanate-free, clear acid-catalysed topcoat with a long pot life, suitable for interior wood. Features: Fast drying rate and long pot life make it ideal for automatic line operations Results in a tough resilient film that protects quality furniture and fittings. High build, provides maximum build with the minimum number of coats applied Low yellowing, ideally suited for application over blond timbers and liming stains Low formaldehyde, provides a safer working environment for persons applying the coatings, and compared to conventional acid catalysed coatings, superior in-service air quality around the coated article Specifications: Colour : Clear Finish : Matt (10%), Satin (30%), Semi Gloss (60%) & Full Gloss Build : Excellent Sandability : Excellent Vertical Hold Up : Excellent Solvent Resistance : Good Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment/gun set up and the article being coated Dry Time : Refer to Technical Datasheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : 10 Parts MIROBILD AC 3606 Part A + 1 Part MIROBILD AC 3800 Universal Catalyst or MIROBILD AC 3810 Quick Dry Catalyst by volume. Mix A & B and then add thinner. Allow mixed product to stand for 15 minutes prior to thinning, this will ensure that maximum film hardness and clarity is obtained. Failure to allow time for reaction to take place may result in a hazy film. Pot Life : 1-2 days at 25°C Pot life varies significantly with ambient temperature, humdity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. Thinning : Thin up to 30% with MIROSOL 1220, 1222 (Fast), 1294 (Medium), 1242 (Slow). In hot or draughty conditions up to 10% MIROSOL 1218 Ultra Slow Thinner may be added. Do not exceed 10% addition as it will retard the drying and could lead to problems with sanding, printing and blocking. Use faster thinners to achieve the required viscosity and then use (only if required) a small amount of MIROSOL 1218 to improve flow and levelling. In damp, cool or high humidity conditions, up to 10% MIROSOL 1297 Retarder may be added to help prevent blushing (a milkiness or haze in the film). Heating the application environment e.g. warming with infra-red lamps and avoid spraying early in the morning and late evening when temperatures are at their coldest, will also help to reduce the risk. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi) Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Curtain Coating - Viscosity 40-50 seconds. Where To Use: Interior use only. Domestic and commercial furniture, wall panelling, joinery and fixtures. Read More

MIROCAT PC 3220 Clear Topcoat

Code: 3220 Premium quality, high build, single pack, pre-catalysed clear lacquer. Features: High solids content provides improved hold up for better overall appearance and reduces the number of coats required Easy to use, achieve an excellent finish with minimal effort Formulated on a very clear, low yellowing resin and contains UV absorbers to ensure maximum protection of the substrate from UV light High in can viscosity allows the applicator to adjust the coating viscosity to suit their requirememts Good clarity, provide good grain definition and depth of colour Excellent flow and levelling results in a smooth even finish Specifications: Colour : Clear Finish : Matt (10%), Satin (30%), Semi Gloss (60%) & Full Gloss Build : High Sandability : Excellent Vertical Hold Up : Good Solvent Resistance : Good Water Resistance : Good Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Thinning Subdued Gloss : Thin up to 30% with MIROSOL 1222 or 1220 (Fast), 1294 (Medium), 1242 (Slow) Thinning Full Gloss : Thin 20-30% with MIROSOL 1222 or 1220 (Fast), 1294 (Medium), 1242 (Slow) Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Hot Spray - Temperature guide 35-40°C. Where To Use: Interior use only. Ideal for domestic furniture, children's toys and furniture, picture frames, musical instruments, joinery and antique restoration Read More

MIROCAT PC 3210 Clear Topcoat

Code: 3210 User friendly, single pack, pre-catalysed clear lacquer for fixture and furniture finishing. Features: Easy to use, achieve an excellent finish with minimal effort Ready for use (RFU), no thinning required, apply directly from the can Good clarity, provide good grain definition and depth of colour Excellent flow and levelling results in a smooth even finish Specifications: Colour : Clear Finish : Satin (30%) & Semi Gloss (60%) Build : High Sandability : Excellent Vertical Hold Up : Good Solvent Resistance : Good Water Resistance : Good Levelling & Flow : Good Sink Back : Minimal Coverage : 6m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated. Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Thinning : Thin up to 10% with MIROSOL 1222 or 1220 (Fast), 1294 (Medium), 1242 (Slow) Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Ideal for domestic furniture, children's toys and furniture, picture frames, musical instruments, joinery and antique restoration Read More

MIROTHANE PU 5545 Clear Sealer

Code: 5545 Premium, two pack, clear, polyurethane sealer that provides an excellent sanding base for clear polyurethane topcoats. Features: Good build enhances the final finish by sealing, filling and covering the fibres of the the substrate Excellent flow and levelling Easy sanding ensures time to sand and the best possible surface tor topcoating Low yellowing, suitable over light coloured wood/veneers and liming stains when mixed with one of the low yellowing MIROTHANE Part B Hardeners Specifications: Colour : Milky in can dries clear Build : Very Good Sandability : Excellent Vertical Hold Up : Good Solvent Resistance : Very Good Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : 2 Parts 5545 Part A + 1 Part 5747 Part B (2A:1B) or 4 Parts 5545 Part A + 1 Part 5715, 5728, 5735 or 5757 (4A:1B) Pot Life : 2-3 hours at 25°C Pot life varies significantly with ambient temperature, humdity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning : Thin 10-20% with MIROSOL 1217 (Fast), 1263 (Medium), 1266 or 1218 (Slow). Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Commercial joinery, wall panelling, domestic furniture, high rise office and hotel fit outs and interior marine fit-outs. Read More

MIROLAC NC 3150 Pigmented Topcoat

Code: 3150 User friendly, single pack, pigmented topcoat ideal for furniture and fixtures. It´s easy to apply, fast drying and results in a velvet smooth high build finish Features: Easy to use to achieve an excellent finish with minimal effort or expertise Excellent build reduces the number of topcoats required Single pack, no pot life issues to manage Formaldehyde free, safer for the applicator, zero formaldehyde emissions in rooms in which articles are installed Phthalate free, ideal for children’s toys and furniture Specifications: Colour : White, matched to colour on request Finish : Matt (10%), Satin (30%), Semi Gloss (60%) & Full Gloss Build : Good Sandability : Good Vertical Hold Up : Good Solvent Resistance : Good Water Resistance : Good Levelling & Flow : Very Good Sink Back : Minimal Coverage : 8m2 per litre at 125 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Thinning : Thin 10-20% with MIROSOL 1222 or 1220 (Fast), 1294 (Medium), 1242 (Slow). Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Ideal for domestic furniture, internal doors, children’s toys and furniture and built in wardrobes. Read More

MIROTHANE PU 5789 Ultra Flex High Solids Hardener

Code: 5789 To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROTHANE PU 5780 Slow Hardener

Code: 5780 To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROTHANE PU 5757 Medium High Solids Hardener

Code: 5757 To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROTHANE PU 5747 Fast Hardener

Code: 5747 To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROTHANE PU 5735 Fast/Med High Solids Hardener

Code: 5735 To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROTHANE PU 5728 Fast Cure High Solids Hardener

Code: 5728 To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROTHANE PU 5718 Vert Fast HS Hardener

Code: 5718 Read More

MIROPOL PE 5202 Accelerator

Code: 5202 Cobalt accelerator for use with MIROPOL Polyester undercoats. To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROBILD AC 3810 Quick Dry Catalyst

Code: 3810 Quick dry catalyst for use with MIROBILD AC Acid Catalysed coatings. To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROTEC WB 8022 Clear Sealer

Code: 8022 Clear, single pack, water based sealer that is easy to apply, low yellowing and easy to sand. Features: Single pack, no pot life issues to manage and less waste of product Easy to sand, powders easily ensuring the quickest time to sand Water white and low yellowing, it is ideal for use over blonde timbers and liming stain Good build, to further minimise the risk of sink back and tannin bleed, apply MIROTHANE PU 5500 Clear Isolator as a first coat on bare wood Low VOC (solvent content), non flammable, low odour, safer for workers and the environment Formaldehyde free, zero formaldehyde emissions in rooms in which coated articles are installed or used Isocyanate free, does not require air assisted face masks or other respiratory personal protective equipment for application Pthalate free, it is ideal for children’s toys Complies with Green Building Council Australia: Green Star – Office Design v3 & Office As Built, Table IEQ-13.1 Maximum TVOC Content Limits for Paints, Varnishes and Protective Coatings Specifications: Colour : Clear Build : Good Sandability : Excellent: Vertical Hold Up : Very Good Solvent Resistance : Good Water Resistance : Good Levelling & Flow : Excellent Sink Back : Minimal Coverage : 7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment with water following use To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Thinning : Supplied ready for use (RFU). However if required, it may be thinned with up to 5% water depending upon application requirements. Note: only thin the volume of MIROTEC WB 8022 required for the job at hand. Once thinned the viscosity will continue to fall during the next 24 hours. If the application viscosity is too low, mix with some unthinned MIROTEC WB 8022 to bring the viscosity back up to the target. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Ideal for domestic and commercial furniture, children’s toys and furniture, picture frames, musical instruments, joinery and antique restoration. Read More

MIROTHANE PU 5535 Clear Sealer

Code: 5535 A two pack, clear, polyurethane sanding sealer typically used under MIROPOL PE 5007 High Gloss Clear Top Coat on timber, veneer or foil covered MDF board to provide a high-gloss, wet look finish. Features: Fast drying and easy sanding Excellent flow & levelling Highlights the grain and colour of Rimu Can be used under any Mirotone clear topcoat Specifications: Build: Very Good Sandability: Very Good Vertical Hold Up: Excellent Solvent Resistance: Very Good Water Resistance: Excellent Levelling & Flow: Excellent Sink Back: Minimal Colour: Milky in-can dries clear To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio: 2 Parts 5535 Part A + 1 Part 5730 Part B Pot Life: 3-4 hours at 25ºC (Pot life varies significantly with ambient temperature, humidity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning: Not normally required but can be thinned up to 5% with MIROSOL 1217 Fast Thinner if required. Suction Gun: Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot: Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400 kpa (50-55 psi) and a pot pressure of 45 kpa (6psi) max. Airless Spray - Use 0.23 to 0.33 (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400 kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90 kpa (10-15psi). Where To Use: Interior use only for example solid and veneer timber fixtures and furniture including restaurant, bar and hotel furniture, pianos and caskets. Read More

MIROTHANE PU 5500 Isolator

Code: 5500 Versatile clear isolator that minimises the risk of resin exudation and tannin bleed on timber and minimises the risk of edge cracking on MDF. Features: Fast drying No sanding required Water white, excellent clarity Excellent adhesion to wood, MDF & LPM Specifications: Colour : Clear Build : Low Vertical Hold Up : Good Solvent Resistance : Good Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 10m2 per litre at 100 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : When used as a two pack mix 10 Parts 5500 Part A + 1 Part 5789 (10A:1B). Pot Life : 4 hours at 25°C Pot life varies significantly with ambient temperature, humidity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning : Thin single pack 20-30% and two pack 12-25% with MIROSOL 1217 (Fast), 1263 (Medium), 1266 (Slow). Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Tannin blocking primer under MIROTEC WB water based coatings, mouldings, picture frames, MDF furniture and fixtures, MDF routed grooves and solid Jarrah furniture and articles. Read More

MIROBILD AC 3622 Clear Sealer

Code: 3622 High build, fast drying, easy sanding, clear acid catalysed sealer. Specifically formulated to provide sound adhesion to DAP and vinyl coated board (commonly used in the casket industry). Features: Fast drying rate and long pot life make it ideal for automatic line operations High build, ensures a full finish when topcoated Excellent sanding reducing sanding time Specifications: Colour : Milky in can, dries clear Build : Excellent Sandability :Excellent Vertical Hold Up : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Datasheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : Best adhesion, best gloss hold up and faster cure at low temperatures e.g. below 20°C: 10 Parts MIROBILD AC 3622 Part A + 1 Part MIROBILD AC 3800 Universal Catalyst or MIROBILD AC 3810 Quick Dry Catalyst by volume. For extended pot life, especially at high temperatures e.g. above 30°C 20 Parts MIROBILD AC 3622 Part A + 1 Part MIROBILD AC 3800 Universal Catalyst or MIROBILD AC 3810 Quick Dry Catalyst by volume. Mix A & B and then add thinner. Allow mixed product to stand for 15 minutes prior to thinning, this will ensure that maximum film hardness and clarity is obtained. Failure to allow time for reaction to take place may result in a hazy film. Pot Life : 1-2 days at 25°C Pot life varies significantly with ambient temperature, humdity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. Thinning : Thin 10-15% with MIROSOL 1220 (Fast), 1294 (Medium), 1242 (Slow) In hot or draughty conditions up to 10% MIROSOL 1218 Ultra Slow Thinner may be added. Do not exceed 10% addition as it will retard the drying and could lead to problems with sanding, printing and blocking. Use faster thinners to achieve the required viscosity and then use (only if required) a small amount of MIROSOL 1218 to improve flow and levelling. In damp, cool or high humidity conditions, up to 10% MIROSOL 1297 Retarder may be added to help prevent blushing (a milkiness or haze in the film). Heating the application environment e.g. warming with infra-red lamps and avoid spraying early in the morning and late evening when temperatures are at their coldest, will also help to reduce the risk. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Curtain Coating - Viscosity 40-50 seconds. Where To Use: Interior use only. Domestic and commercial furniture, caskets. Read More

MIROCAT PC 3241 Clear Sealer

Code: 3241 An economical, fast drying, easy to sand clear sealer. Can be applied over dark timbers or stains enhancing the natural colours without clouding the finished appearance. Features: High build provides improved hold up and reduces the number of coats required Easy to use, achieve an excellent finish with minimal effort Fast drying allows early sanding which minimises production time Specifications: Colour : Turbid in can, dries clear Build : High Sandability : Excellent Vertical Hold Up : Very Good Solvent Resistance : Good Water Resistance : Good Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Thinning : Thin up to 10% with MIROSOL 1222 or 1220 (Fast), 1294 (Medium), 1242 (Slow). Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Ideal for domestic furniture, children’s toys and furniture, picture frames, musical instruments, joinery and antique restoration. Read More

MIROCAT PC 3244 Clear Sealer

Code: 3244 High build, single pack, clear pre-catalysed sanding sealer provides an excellent base for a range of Mirotone topcoats. Features: High build provides improved hold up and reduces the number of coats required Easy to use, achieve an excellent finish with minimal effort May be catalysed with MIROBILD AC 3800 Universal catalyst to improve chemical resistance when using as a sealer under acid-catalysed and polyurethane topcoats Fast drying allows early sanding which minimises production time Specifications: Colour : Milky in can, dries clear Build : High Sandability : Excellent Vertical Hold Up : Very Good Solvent Resistance : Good Water Resistance : Good Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : To improve the water and chemical resistance of the coating system, add 20ml of MIROBILD AC 3800 Catalyst to every litre of MIROCAT PC 3244 and then add thinner. Apply catalysed coating within two days of adding catalyst. Pot Life : 2 days at 25°C Pot life varies significantly with ambient temperature, humidity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning : Thin 15-30% with MIROSOL 1222 or 1220 (Fast), 1294 (Medium), 1242 (Slow) Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Ideal for domestic furniture, children’s toys and furniture, picture frames, musical instruments, joinery and antique restoration. When catalysed and top coated with MIROBILD AC topcoats or MIROTHANE PU 5588 Clear Topcoat may be used on kitchen cabinets and commercial furniture. Read More

MIROTHANE PU 5631 White Undercoat

Code: 5631 Premium, high build, two pack polyurethane undercoat. Features: Fast drying, ideal for automatic lines with in-line or early forced drying Easy to sand, powders easily making it ideal for hand sanding Has a slight sheen making it easier to see where it has been sanded Low sink back, produces and excellent high gloss finish when topcoated with one of Mirotone’s full gloss polyurethane topcoats, comparable with the gloss achieved with a polyester undercoat Excellent vertical hold up Specifications: Colour : White & Tinted Finish : Slight sheen Build : Very High Sandability : Excellent Vertical Hold Up : Excellent Solvent Resistance : Excellent Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated. Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio (by volume) : 2 Parts 5631 Part A + 1 Part 5747 Part B (2A:1B) or 4 Parts 5631 Part A + 1 Part 5728 or 5735 (4A:1B) Pot Life : 2 hours at 25°C Pot life varies significantly with ambient temperature, humdity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning : Thin up to 40% with MIROSOL 1217 (Fast), 1263 (Medium) or 1218, 1266 (Slow). Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use. Interior doors, kitchen & bathroom cabinets, commercial joinery, wall panelling and domestic furniture. Read More

MIROTHANE PU 5626 White Undercoat

Code: 5626 Premium grade, high solids, low viscosity two pack polyurethane undercoat. Very easy to sand and provides excellent DOI (Distinction of Image) when topcoated with a MIROTHANE PU topcoat gloss. Features: Easy to sand, powders easily making it ideal for hand sanding High solids, low viscosity provides superior build with minimal thinning. Excellent for sealing the fibres of MDF. Superior chemical and moisture resistance Use up excess MIROTHANE PU 5650 topcoat by adding it into MIROTHANE PU 5626 to create your own tinted undercoat Specifications: Colour : White, Black & Tinted Build : Very High Sandability : Excellent Vertical Hold Up : Excellent Solvent Resistance : Excellent Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ration (by volume) : 3 Parts 5626 Part A + 1 Part 5747 Part B (3A:1B) or 5 Parts 5626 Part A + 1 Part 5715, 5728 or 5735 (5A:1B) Pot Life : 2 hours at 25°C Pot life varies significantly with ambient temperature, humdity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Thinning : Thin up to 20% with MIROSOL 1217 (Fast), 1263 (Medium), 1218, 1266 (Slow) Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use. Doors, kitchen & bathroom cabinets, commercial joinery and wall panelling and domestic furniture. Read More

MIROPOL PE 5130 White Undercoat

Code: 5130 A high build, white polyester undercoat for MDF and particleboard. It is easy to sand and is designed to be top coated with MIROTHANE PU polyurethane topcoats. Features: Easy to sand, will powder easily ensuring quick sanding Excellent vertical hold up Excellent flow Excellent build, it will enhance the finished appearance of the topcoat by filling and covering the fibres of the substrate Specifications: Colour : White Specific Gravity : 1.45 +/-0.05 Build : Excellent Sandability : Excellent Vertical Hold Up : Good Solvent Resistance : Very Good Water Resistance : Very Good Levelling & Flow : Very Good Sink Back : Minimal Coverage : 3m2 per litre at 300 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1208 or 1234 Thinner. To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Mixing Ratio : Mix by volume, 1 Litre 5130 Part A + 20ml 5202 Accelerator + 10ml Peroxide (MEKP Catalyst) (100:2:1) Always mix 5202 Accelerator into the 5130 Part A base before adding the peroxide (MEKP Catalyst). Mixing the Accelerator and the Peroxide Hardener together may cause an explosion or fire. Pot Life : Approximately 45 minutes at 25°C. Pot life varies significantly with ambient temperature and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. The larger the quantity mixed, the shorter the pot life will be. Only mix the quantity required for the job. Refer to the MIROPOL PE Polyester Product Information Guide for mixing ratios to extend pot life. Thinning : Up to 30% with MIROSOL 1208, 1234 or 1224 Thinner. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Interior doors, kitchen & bathroom cabinets, commercial joinery and wall panelling and domestic furniture Read More

MIROBILD AC 3720 White Undercoat

Code: 3720 A high build, free sanding undercoat for use on wood, medium density fibreboard (MDF) or particleboard. Ease of sanding makes for faster throughput in a production situation. Features: High build, enhances the finished appearance of the topcoat and can be applied directly over MDF to seal the fibres Easy to sand Excess MIROBILD AC 3770 topcoat may be added into MIROBILD AC 3720 undercoat to create a tinted undercoat. This improves coverage and reduces waster of topcoat Specifications: Colour : White Finish : N/A Build : Excellent Sandability : Excellent Vertical Hold Up : Excellent Water Resistance : Excellent Levelling & Flow : Excellent Sink Back : Minimal Coverage : 6-7m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet: Register To View Application: Mixing Ratio (by volume) : 10 Parts MIROBILD AC 3720 Part A + 1 Part MIROBILD AC 3800 Universal Catalyst or MIROBILD AC 3810 Quick Dry Catalyst by volume. Mix A & B and then add thinner. Allow mixed product to stand for 15 minutes prior to thinning, this will ensure that maximum film hardness and clarity is obtained. Failure to allow time for reaction to take place may result in a hazy film. Pot Life : 1 day at 25°C Pot life varies significantly with ambient temperature, humdity and the quantity mixed. Pot life is longer at lower temperatures and shorter at higher temperatures. Thinning : Thin up to 20% with MIROSOL 1220 (Fast), 1294 (Medium), 1242 (Slow) In hot or draughty conditions up to 10% MIROSOL 1218 Ultra Slow Thinner may be added. Do not exceed 10% addition as it will retard the drying and could lead to problems with sanding, printing and blocking. Use faster thinners to achieve the required viscosity and then use (only if required) a small amount of MIROSOL 1218 to improve flow and levelling. In damp, cool or high humidity conditions, up to 10% MIROSOL 1297 Retarder may be added to help prevent blushing (a milkiness or haze in the film). Heating the application environment e.g. warming with infra-red lamps and avoid spraying early in the morning and late evening when temperatures are at their coldest, will also help to reduce the risk. Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Curtain Coating - Viscosity 40-50 seconds. Where To Use: Interior only. Domestic & commercial furniture, wardrobes, joinery and fixtures. Read More

MIROLAC NC 3130 White Undercoat

Code: 3130 A user friendly, single pack, pigmented undercoat for internal wood and medium density fireboard (MDF). It is fast drying with excellent sanding properties. Features: Easy to sand, powders easily reducing sanding time Fast drying enables increased production throughput Minimises the risk of wax extraction when applied over MDF and HDF Single pack, no pot life issues to manage Formaldehyde free. safer for the applicator, zero formaldehyde emissions in rooms in which articles are installed Use up left over MIROLAC NC 3150 topcoat by adding MIROLAC NC 3130 to create your own tinted undercoats Specifications: Colour : White Build : Good Sandability : Good Vertical Hold Up : Good Solvent Resistance : Good Water Resistance : Good Levelling & Flow : Very Good Sink Back : Minimal Coverage : 6m2 per litre at 150 micron wet film build. This is dependent on the application equipment / gun set up and the article being coated Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using MIROSOL 1222 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Thinning: Thin 25-40% with MIROSOL 1222 or 1220 (Fast), 1294 (Medium), 1242 (Slow). Suction Gun - Use 1.5 to 2mm (59-79 thou) orifice with 350-400kpa (50-55 psi). Pressure Pot - Use 1.5 to 2mm (59-79 thou) orifice with pressure pot air-cap. Gun pressure 350-400kpa (50-55 psi) and a pot pressure of 45kpa (6 psi) max. Airless Spray - Use 0.23 to 0.33mm (9-13 thou) orifice, 15cm fan (dependent on job) with regulated pump pressure of 350-400kpa (50-55 psi). Air Mix Guns - Settings similar to airless spray with the air-assisted regulator pressure at 70-90kpa (10-15psi). Where To Use: Interior use only. Ideal for domestic furniture, internal doors, children’s toys and furniture and built in wardrobes. Read More

STRIPCOAT

Code: 3520 Temporary coating designed to provide a removable protective film to the inside of galvanised steel spray booths. This film can be easily removed to reduce unwanted overspray build up reducing the risk of dust contamination and the risk of fire. Features: Fast drying White in colour, provides good light reflection when applied to internal spray booths Dries to a strippable film when applied at the correct wet film thickness Dries to a white flexible film To View Tech Data Sheet: Register To View Where To Use: Galvanised steel spray booths only Read More

MIROLOK 3508 Glass Clean/Prime

Code: 3508 Easy to use, fast drying primer used to both clean glass and provide excellent adhesion to glass for MIROTHANE PU metallic, pearlescent or solid coloured topcoats. Features: Cleans and primes in one action Easy to use, no mixing or pot life issues Fast drying Specifications: Recommended Topcoats: MIROTHANE PU 5605 mixed 2A:1B with 5789 MIROTHANE PU 5640 mixed 10A:1B with 5789 MIROTHANE PU 5650/30 mixed 3A:1B with 5735 or 1A:1B with 5747 MIROTHANE PU 5650/FG mixed 1A:1B with 5780 or 2A:1B with 5789 To View Tech Data Sheet: Register To View Application: Apply to glass with a clean, soft absorbent, lint-free cloth or if applying to a large area use a plastic trigger spray pack. Wipe wet surface vigorously in the same way you would a glass cleaner. Finish with a clean rag wiping hard enough to remove excess primer and the majority of the streaks. Where To Use: Glass splashbacks, toughened glass countertops, glass furniture and glass feature walls. Read More

MIROSTAIN 2616 Pigment Stain - Medium to Slow Dry (Solvent Based)

Code: 2616 High strength pigment stain designed to produce traditional strong stain colours that accentuate the grain. Features: Easy to use, results in a uniform colour Universal application, can be applied by spraying, brushing or wiping Excellent light stability for a pigment stain thereby providing more consistent and fade resistant colours Can be added to MIROCAT PC, MIROBILD AC and MIROTHANE PU Clear Coatings for toning and shading to improve colour, depth and consistency Specifications: Colour (Tint Strength) : TV - Ultra String Tint TX - Strong Tint TY - Medium Tint TZ - Light Tint Primary Colours : #5090 Yellow Oxide #6022 Burnt Umber #7007 Scarlet #8100 Phthalo Blue #9100 Phthalo Green #9999 Black Coverage : The coverage is determined by the application method and the strength of colour required Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using 1222, 1228 or 1286 Thinner To View Tech Data Sheet and Safety Data Sheet: Register To View Application: Thinning : MIROSTAIN 2616 is supplied ready for use (RFU). However to achieve lighter tones reduce with MIROSOL 1222 (Fast), MIROSOL 1231 (Medium), 1242 (Slow) thinners or 1218, 1228, 1233 (Ultra Slow) thinners. MIROSTAIN 2616 must be unreduced when adding to MIROCAT PC, MIROBILD AC or MIROTHANE PU. Toning : required, to provide extra depth of colour, add up to 10% by volume of unreduced MIROSTAIN 2616 to MIROCAT PC or MIROBILD AC coatings. Apply in light even coats over sealed timber to obtain depth of colour. Pad or Rag - Use a clean lint free cloth, apply in even strokes. Suction Gun - Use 1.5mm (59 thou) orifice with 280kpa (35 psi). It is important not to apply MIROSTAIN above this pressure to avoid dark or blotchy discolouration. Pressure Pot - Use 1mm orifice with pressure pot air-cap. Gun pressure 280kpa (35 psi) and a pot pressure of 16kpa (2 psi) max. Airless Spray - Contact Mirotone’s Technical department. Air Mix Guns - Contact Mirotone’s Technical department. Where To Use: Interior use only. Pine furniture, architraves and skirting boards, internal doors, built-in wardrobes and joinery and fixtures. Read More

MIROSTAIN 2101 Dye Stain - Fast Drying (Water Based)

Code: 2101 Low grain raising, water based stain designed to provide uniform colour with excellent clarity without masking the wood grain. Features: Low odour, low VOC, non flammable, no class 3 flammable goods storage required Universal application, can be applied by spraying, wiping, brushing or dipping Medium-slow dry speed, easy to apply resulting in a uniform applications Excellent light stability for dye stain thereby proving more consistent and fade resistant colours Specifications: Colour (Tint Strength) : TV - Ultra String Tint TX - Strong Tint TY - Medium Tint TZ - Light Tint Primary Colours : #5000 yellow #5067 Orange #7000 Red #7270 Crimson #8000 Blue #9999 Black Coverage : The coverage is determined by the application method and the strength of colour required Dry Time : Refer to Technical Data Sheet Clean Up : Clean all equipment using water To View Tech Data Sheet: Register To View Application: Thinning : MIROSTAIN 2101 is supplied ready for use (RFU). However to achieve lighter tones reduce with MIROSTAIN 2101 CTB. Pad or Rag - Use a clean lint free cloth, apply in even strokes. Suction Gun - Use 1.5mm (59 thou) orifice with 280kpa (35 psi). It is important not to apply MIROSTAIN above this pressure to avoid dark or blotchy discolouration. Pressure Pot - Use 1mm orifice with pressure pot air-cap. Gun pressure 280kpa (35 psi) and a pot pressure of 16kpa (2 psi) max. Airless Spray - Contact Mirotone’s Technical department. Air Mix Guns - Contact Mirotone’s Technical department. Where To Use: Interior use only. Pine furniture, architraves and skirting boards, internal doors, built-in wardrobes and joinery and fixtures. Stain Colour Charts When choosing a colour for your project it is important to consider the type of timber finish you require for your chosen project. The choice of timber stain is crucial as the surface will need to withstand general wear and tear and environmental factors. It is also important to consider the type of timber used for the project. Final colour appearance may vary with different timber species, texture, size and shape of the area. Stain colours available in 4L, 20L and 205L. Need more information about our colour range? Contact Mirotone Read More

MIROSTRIP 1019 Paint Stripper

Code: 1019 General purpose paint stripper suitable for stripping most types of paint from timber and metal surfaces. Features: Ready for use Apply by brush Specifications: Clean Up : Clean all equipment using MIROSOL 1228 or 1231. Metal surfaces may be hosed down with a high pressure water jet wash. Application: Apply a thick film by brush. Allow to stand for 3 to 5 minutes (most paints will bubbles and wrinkle). Remove with a wide metal scraper. MIROSTRIP may be left longer (10-30 minutes) for more difficult to remove paints. Sanding the surface prior to application of MIROSTRIP 1019 with 180 grit sandpaper can help the stripper to penetrate the coating. Ensure that all MIROSTRIP 1019 is thoroughly removed before coatings (sand with 180-240 grit sandpaper to remove residue). Where To Use: Removes most type of paint; nitrocellulose, precatalysed lacquers, alkyd paints, acid catalysed and polyurethane coatings. To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

MIROFIL 1702 Wood Filler

Code: 1702 Easy to use, single-pack wood filler used to produce a closed-pore finish. To View Tech Data Sheet and Safety Data Sheet: Register To View Read More

Antimicrobial Coatings

Intumescent Fire-Retardent

XEROFIRE High Performance Clear Intumescent Coating System A unique range of leading technology, professional wood finishing products formulated to upgrade (or maintain) the fire-rating of a wide variety of wood-based substrates including veneered panels, solid hard- and softwoods, plywood, MDF and wood-composite boards. The xerofire® Fire Retardant Coatings system comprises of a 2K Waterborne Intumescent Basecoat in combination with a 2K Acid Catalyst Clear Topcoat providing a high quality, furniture-grade finish. For further information Contact Us. XEROFIRE Coating System Brochure A clear coat intumescent system designed to achieve GROUP 1S (New Zealand only) on timber and timber related products. Download Brochure. XEROFIRE Technical Data Sheet A unique range of leading technology, professional wood finishing products formulated to upgrade (or maintain) the fire-rating of a wide variety if wood-based substrates including veneered panels, solid hard and softwood’s, plywood, MDF and wood-composite boards. To View Tech Data Sheet: Register To View Read More

MIROCURE UV Coatings

Mirotone is a leading supplier of UV Coatings in Australia with over 50 years experience in UV technology, Mirotone has a large range of coatings & the technical expertise to find the tailored solution for each specific customer. The MIROCURE UV range of consists of three application methods including spray, roller coat and vacuum coater applied. Our in situ applied floor coatings are designed for the Australian environment and offer a complete product range including water based floor coatings, moisture cures, polyurethanes and oil based floor coatings, solvents, thinners, additives and floor maintenance products. MIROCURE UV Coatings (Spray Applied): Mirotone has a large range of MIROCURE UV coatings suitable for application by automated spray equipment. Typical applications include wall panelling, mouldings, interior furniture and fittings and hard wearing panel work. MIROCURE UV Coatings (Roller Coat Applied): Mirotone has a wide range of MIROCURE UV coatings suitable for application by roller coater. Typical applications consist of wall panelling and timber flooring. MIROCURE UV Coatings (Vacuum Coater Applied): Mirotone has a range of MIROCURE UV coatings suitable for application by vacuum coater. Typical applications include blinds and shutters, wall panelling and mouldings. To find out more about Mirotone’s Range of MIROCURE UV Coatings Contact Us for more information. Read More

Solvent Based Glass Coatings

Mirotone’s glass coatings system offers a simple three step coating process that is easy to apply, fast drying and versatile. The excellent adhesion of this system gives applicators peace of mind during installation and whilst in service. MIROTHANE PU 5640 Metallic / Pearlescent Tint Base: A fast drying, two pack polyurethane available in a stunning range of vibrant metallic and pearl finishes. MIROTHANE PU 5605 Pigment Topcoat: A premium two pack polyurethane topcoat. It has excellent flow and levelling and drying characteristics and has excellent chemical resistance. MIROTHANE PU 5650 Pigmented Topcoat: A user friendly two pack polyurethane with excellent resistance to water, general household contaminates, marring and scuffing. Read More

Water Based Glass Coatings

Shipping Containers

Shipping Containers MIROKEY VY 6615 Etch Primer will provide superior adhesion to a wide variety of metals, while MIROTHANE PU PU 5629 Polyurethane Primer will provide a high build undercoat that can be sanded. MIROTHANE PU 5610 Acrylic Topcoat will ensure excellent exterior durability, protecting equipment against harsh weather and surrounding environmental conditions. MIROTHANE PU 5610 is designed to provide a high gloss, durable finish for shipping containers, boats and ships. Metal skip bins are commonly used to hold open-topped loads of construction, demolition waste, rubbish and recycled materials. Mirotone has a coating system ideal for the refurbishment of skip bins. Mirotone coatings are designed to be applied over raw steel and provide a protective and decorative coating for skip bins. MIROKEY 6615 Etch Primer: Is a high performance, zinc phosphate etch primer specifically designed for direct application over mild steel, zinc-anneal, chrome, brass, lead and lead alloys, stainless steel, aluminium and galvanised iron. Excellent adhesion to a variety of cleaned metal surfaces Single pack, easy to use Contains zinc phosphate, proven corrosion resistance Fast drying MIROTHANE PU 5610 Pigmented Topcoat: A high performance, two pack, acrylic modified polyurethane coating. This is a high gloss polyurethane which has superior coverage and excellent durability. MIROTHANE PU 5610 also has superior adhesion over a wide variety of substrates. Outstanding durability, gloss and colour retention Excellent opacity, achieve a high gloss finish with minimal coats Read More

Machinery / Earth Moving Equipment

Machinery All machinery whether new or old will require refurbishment or painting straight from the factory line. MIROKEY ZP 6940 Zinc Phosphate Primer and MIROLON AK 6980 High Gloss Topcoat are designed to provide a decorative and protective surface to all metal surfaces. This coating system can be applied to all metal objects including farm equipment, lawn mowers, tractors, harvesters and a variety of metal trailers. (Refer to technical for further information). MIROPRIME ZP 6940 Zinc Phosphate Primer: Is a fast drying, single pack, high build, high solids pigmented zinc phosphate primer for exterior and interior metal surfaces. MIROPRIME ZP 6940 is an anti-corrosive shop / field primer designed for light industrial and commercial environments. Coupled with excellent drying properties and a smooth surface, it is an ideal based to be top coated with MIROLON AK 6980. High build coating provides a protective film for limited exterior exposure Single pack, no pot life issues to manage Superior coverage provides the best possible coverage with minimal coats applied Fast drying, faster handling and shipping MIROLON AK 6980 High Gloss Topcoat: Is a user friendly, single pack, pigmented topcoat ideal for light industrial metal fixtures and transportable containers such as trailers, rubbish / skip bins and metal fabrications. MIROLON AK 6980 is a high build coating that dries to a high gloss finish. MIROLON AK 6980 can be applied directly over bare metal to achieve a high build coating system. An easy to apply coating that can be applied directly over bare metal when needed Excellent build reduces the number of topcoat required Single pack, no pot life issues to manage Formaldehyde free, safer for the applicator, zero formaldehyde emissions Isocyanate free Earth Moving Equipment This superior, tough coating system has been designed to protect earth moving equipment against Australia’s harsh elements: MIROKEY VY 6615 Etch Primer provides superior adhesion to a wide range of metals. MIROTHANE PU 5629 Pigmented 2K Primer provides a higher build undercoat that can be sanded. MIROTHANE PU 5610 Acrylic Topcoat provides excellent exterior durability which ensures that the coated equipment is protected against the harsh weather and environmental conditions. MIROTHANE PU 5610 is designed to provide a high gloss, durable finish for bulldozers, graders, bobcats and all forms of earth moving equipment and mining equipment MIROKEY 6615 Etch Primer: Is a high performance, zinc phosphate etch primer specifically designed for direct application over mild steel, zinc-anneal, chrome, brass, lead and lead alloys, stainless steel, aluminium and galvanised iron. Excellent adhesion to a variety of cleaned metal surfaces Single pack, easy to use Contains zinc phosphate, proven corrosion resistance Fast drying MIROTHANE PU 5629 Pigmented 2K Metal Primer: Is a premium grade, high solids, low viscosity polyurethane primer for metal. Its excellent sanding properties provide an excellent base for MIROLON enamel and MIROTHANE PU polyurethane topcoats. Easy to sand, powders easily making it ideal for hand sanding High solids, low viscosity provides superior build with minimal thinning Superior chemical and moisture resistance Fast drying properties ensure early recoat and faster shipping & handling times MIROTHANE PU 5610 Pigmented Topcoat: A high performance, two pack, acrylic modified polyurethane coating. This is a high gloss polyurethane which has superior coverage and excellent durability. MIROTHANE PU 5610 also has superior adhesion over a wide variety of substrates. Outstanding durability, gloss and colour retention Excellent opacity, achieve a high gloss finish with minimal coats Read More

Skip Bins

Metal skip bins are commonly used to hold open-topped loads of construction, demolition waste, rubbish and recycled materials. Mirotone has a coating system ideal for new skip bins and the refurbishment of old skip bin. Mirotone coatings are designed to be applied over raw steel and provide a protective and decorative coating for skip bins. Skip Bins Metal skip bins are commonly used to hold open-topped loads of construction, demolition waste, rubbish and recycled materials. Mirotone has a coating system ideal for new skip bins in an easy to follow two step system comprising of MIROPRIME ZP 6940 Zinc Phosphate Primer and MIROLON AK 6980 High Gloss Enamel. The refurbishment of skip bins couldn’t be simpler with MIROPRIME ZP 6935 Zinc Phosphate Primer and MIROLON AK 6960 Gloss Enamel Topcoat. Mirotone coatings are designed to be applied over raw steel and provide a protective and decorative coating for skip bins. New Skip Bins MIROPRIME ZP 6940 Zinc Phosphate Primer: Is an anti-corrosive, high build, high solids, single pack (no pot life issues), provides a fast drying base coat that results in a smooth, superior finish. High build coating provides a protective film* refer to datasheet Single pack, no pot life issues to manage Superior coverage provides the best possible coverage with minimal coats applied. Fast drying, faster handling and shipping MIROLON AK 6980 High Gloss Enamel: A full gloss, pigmented topcoat that can be colour matched to suit any colour. Easy to apply, single pack, formaldehyde and Isocyanate free formula is safer for both the applicator and means zero formaldehyde emissions. Apply directly over bare metal when needed Excellent build reduces the number of topcoats required Single pack, no pot life issues Formaldehyde free, safer for the applicator, zero formaldehyde emissions Isocyanate free Refurbishing Skip Bins MIROPRIME ZP 6935 Zinc Phosphate Primer: Anti corrosive, high build, high solids, single pack (no pot life issues), superior coverage primer – provides the best possible base with one coat. Fast drying ensures faster handling and shipping. High build coating provides a protective film *refer to datasheet Single pack, no pot life issues to manage Superior coverage provides the best possible coverage with minimal coats applied Fast drying, faster handling and shipping MIROLON AK 6960 Gloss Enamel: A full gloss, pigmented topcoat that can be colour matched to suit any colour. Easy to apply, single pack, formaldehyde and isocyanate free formula is safer for both the applicator and means zero formaldehyde emissions. Apply directly over bare metal when needed Excellent build reduces the number of topcoat required Single pack, no pot life issues to manage Formaldehyde free, safer for the applicator, zero formaldehyde emissions Isocyanate free Read More

Metal Fabrication (Metal Door Frames)

Mirotone has a range of metal door coatings that are designed to with stand the harsh Australian conditions. Our zinc phosphate primer is an ideal base for metal fabrication and door frames, as it is designed to be applied over raw steel to provide a protective finish. MIROPRIME ZP 6940 Zinc Phosphate Primer: Anti corrosive, high build, high solids, single pack (no pot life issues), shop field primer – provides a fast drying base coat which results in a smooth, superior coverage finish. Topcoat – Paint onsite with a wide range of decorative paints. High build coating provides a protective film *refer to datasheet Single pack, no pot life issues to manage Superior coverage provides the best possible coverage with minimal coats applied Fast drying, faster handling and shipping Read More

Truck Bodies

Mirotone’s range of truck body coating systems are designed to protect exterior metal surfaces where a durable finish is required. MIROKEY 6615 Etch Primer provides superior adhesion to a wide range of metals while providing a solid foundation for the topcoat. MIROTHANE PU 5610 Pigmented Topcoat has been designed to provide a high gloss durable finish to a wide variety of metal articles used in the automotive market, truck body building, camper vans and waste recycling trucks Mirotone’s range of metal coatings that are designed to withstand the harsh Australian conditions. Out two step coating system is ideal for painting truck bodies and trays. It is designed to be applied over raw steel to provide a protective and decorative finish. MIROKEY VY 6615 Etch Primer: Anti corrosive, high performance, single pack (no pot life issues), etch primer – provides a fast drying base coat with excellent adhesion on metal surfaces. Excellent adhesion to a variety of cleaned metal surfaces Single pack. easy to use Contains zinc phosphate, proven corrosion resistance Fast drying MIROTHANE PU 5610 Pigmented Pigmented Topcoat: A full gloss, pigmented topcoat that can be colour matched to suit any colour. Easy to apply, two pack coating exhibits outstanding durability and colour retention to a variety of metal substrates. Outstanding durability, gloss and colour retention Excellent opacity, achieve a high gloss finish with minimal coats Read More

MIROWAX 738 Finishing Wax

Code: 1012-002 Environmentally friendly, wax polish made from a blend of beeswax and tree oils, designed to clean, seal and protect while providing a protective, heat and alcohol resistant coating. This natural wax finish is designed to produce a low gloss lustre or where the appearance of natural timbers is to be enhanced. Ready For Use: Apply straight from the can with a soft rag as a furniture polish or reviver. Specifications: Colour : NaturalFinish : Mineral Turps To View Tech Data Sheet: Register To View Application: Wipe - Soak steelwool (00 or 000 grade) with MIROWAX 738 mixed with 1:1 mineral turps. Rub in the direction of the grain to a smooth finish. Remove excess with a clean soft lint free cloth. Spray - Lightly denib the surface with 400 grit sandpaper. Dilute MIROWAX 738 1 part to 2-3 parts mineral turps. Spray a light coat over the surface. Remove excess with a soft lint free cloth. Where To Use: Children's toys, furniture, trophey bases & carved ornaments and articles. Read More

SPRAYGLOW

Code: 1012004 Lightly perfumed, silicone-free furniture polish which has been specifically formulated to clean and protect both lacquered and unlacquered wooden articles. Features: Spray Glow is suitable for cleaning and protecting any low gloss surface, including laminated bench tops and cupboards. Colour : Clear Finish : Low Gloss Application: Apply a light even coat, hold can approximately 30cm from the article being coated. Wipe with a soft cloth. Where To Use: Furniture polish. low gloss kitchen cupboards, laminex benchtops (low gloss) To View Tech Data Sheet: Register To View Read More